- 首页
- 第三方数据
- WILMINK GROUP
- Shaft Seal, intermediate shaft
| 参考号 | 零件 | 参数 |
|---|---|---|
| WILMINK GROUP : WG1183395 | Shaft Seal, intermediate shaft | Height: 11.60 mm; Thickness: 22.20 mm; : Clockwise rotation ; : FPM (fluoride rubber) ; Inner Diameter: 40.00 mm; Outer diameter: 138.00 mm; Radial Shaft Seal Design: 840S RD ; |
| WILMINK GROUP : WG1183513 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1183584 | Shaft Seal, intermediate shaft | Height: 7.00 mm; : Clockwise rotation ; : MVQ (silicone rubber) ; Inner Diameter: 30.00 mm; Outer diameter: 40.00 mm; Radial Shaft Seal Design: 827S RD W ; |
| WILMINK GROUP : WG1184032 | Shaft Seal, intermediate shaft | Height: 6.00 mm; : Clockwise rotation ; : NBR (nitrile butadiene rubber) ; Inner Diameter: 25.00 mm; Outer diameter: 35.00 mm; : Right-hand Twist ; Radial Shaft Seal Design: 827S RD ; |
| WILMINK GROUP : WG1177396 | Shaft Seal, intermediate shaft | Height: 8.00 mm; Radial Shaft Seal Design: 827N LD ; : Can be used in clockwise and anticlockwise direction ; : ACM (Polyacrylate) ; Inner Diameter: 30.00 mm; Outer diameter: 42.00 mm; : Alternating Twist ; |
| WILMINK GROUP : WG1086340 | Shaft Seal, intermediate shaft | Height: 7 mm; Radial Shaft Seal Design: ASW ; : with dust lip ; : FPM (fluoride rubber) ; Inner Diameter: 30 mm; Outer diameter: 42 mm; : Right-hand Twist ; |
| WILMINK GROUP : WG1086403 | Shaft Seal, intermediate shaft | Height: 10 mm; : Right-hand Twist ; Radial Shaft Seal Design: ASW ; : with dust lip ; Observe mounting information: ; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Inner Diameter: 32 mm; Outer diameter: 47 mm; |
| WILMINK GROUP : WG1086455 | Shaft Seal, intermediate shaft | Height: 7 mm; Inner Diameter: 30 mm; Outer diameter: 42 mm; : Right-hand Twist ; Radial Shaft Seal Design: ASW ; : with dust lip ; : ACM (Polyacrylate) ; |
| WILMINK GROUP : WG1085139 | Shaft Seal, intermediate shaft | Height: 10 mm; Inner Diameter: 32 mm; Outer diameter: 47 mm; : Alternating Twist ; Radial Shaft Seal Design: ASW ; : with dust lip ; Alternative Repair Kit: WG1754320 ; : FPM (fluoride rubber)/ACM (polyacrylate rubber) ; |
| WILMINK GROUP : WG1195093 | Shaft Seal, intermediate shaft | Height: 7 mm; Observe mounting information: ; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Inner Diameter: 15 mm; Outer diameter: 36 mm; : Right-hand Twist ; Radial Shaft Seal Design: AW ; : without dust lip ; |
| WILMINK GROUP : WG1191839 | Shaft Seal, intermediate shaft | Height: 7 mm; Inner Diameter: 30 mm; Outer diameter: 47 mm; Radial Shaft Seal Design: AW/BS ; |
| WILMINK GROUP : WG1191892 | Shaft Seal, intermediate shaft | Height: 7 mm; Observe mounting information: ; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Inner Diameter: 15 mm; Outer diameter: 32 mm; : Right-hand Twist ; Radial Shaft Seal Design: AW ; : without dust lip ; |
| WILMINK GROUP : WG1191572 | Shaft Seal, intermediate shaft | Height: 6 mm; : with dust lip ; : FPM (fluoride rubber) ; Inner Diameter: 25 mm; Outer diameter: 35 mm; : Right-hand Twist ; Radial Shaft Seal Design: AS ; |
| WILMINK GROUP : WG1192043 | Shaft Seal, intermediate shaft | Height: 7 mm; Radial Shaft Seal Design: AW/BS ; : with dust lip ; : ACM (Polyacrylate) ; Inner Diameter: 30 mm; Outer diameter: 52 mm; : Right-hand Twist ; |
| WILMINK GROUP : WG1195811 | Shaft Seal, intermediate shaft | Height: 11.6 mm; Radial Shaft Seal Design: SP ; : with mounting sleeve ; : FPM (fluoride rubber) ; Inner Diameter: 40 mm; Outer diameter: 98.8 mm; : Right-hand Twist ; |
| WILMINK GROUP : WG1223374 | Shaft Seal, intermediate shaft | Outer diameter 1: 70 mm; Inner Diameter 1: 50 mm; Height 1: 10 mm; : FPM (fluoride rubber) ; : Right-hand Twist ; : with dust lip ; |
| WILMINK GROUP : WG1226464 | Shaft Seal, intermediate shaft | Fitting Position: frontal sided ; : Right-hand Twist ; : with dust lip ; Outer diameter 1: 50 mm; for OE No.: 080714 ; Inner Diameter 1: 35 mm; Height 1: 7 mm; : FPM (fluoride rubber) ; |
| WILMINK GROUP : WG1224000 | Shaft Seal, intermediate shaft | Fitting Position: frontal sided ; : FPM (fluoride rubber) ; : Right-hand Twist ; : with dust lip ; Outer diameter 1: 56 mm; for OE No.: 94580413 ; Inner Diameter 1: 42 mm; Height 1: 7 mm; |
| WILMINK GROUP : WG1222368 | Shaft Seal, intermediate shaft | Fitting Position: frontal sided ; Height 1: 7 mm; : ACM (Polyacrylate) ; : Right-hand Twist ; : with dust lip ; Outer diameter 1: 42 mm; for OE No.: 40004240 ; Inner Diameter 1: 30 mm; |
| WILMINK GROUP : WG1222383 | Shaft Seal, intermediate shaft | Fitting Position: frontal sided ; Outer diameter 1: 48 mm; for OE No.: 034115137A ; Inner Diameter 1: 35 mm; Height 1: 10 mm; : FPM (fluoride rubber) ; : Right-hand Twist ; : with dust lip ; |
| WILMINK GROUP : WG1222916 | Shaft Seal, intermediate shaft | Fitting Position: Engine ; Outer diameter 1: 52 mm; Inner Diameter 1: 30 mm; Height 1: 7 mm; : NBR (nitrile butadiene rubber) ; : Right-hand Twist ; |
| WILMINK GROUP : WG1222953 | Shaft Seal, intermediate shaft | Inner Diameter 1: 30 mm; Height 1: 8 mm; : FPM (fluoride rubber) ; : Left-hand Twist ; : with dust lip ; Outer diameter 1: 44 mm; |
| WILMINK GROUP : WG1226627 | Shaft Seal, intermediate shaft | Height 1: 7 mm; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; : Right-hand Twist ; Outer diameter 1: 36 mm; Inner Diameter 1: 15 mm; |
| WILMINK GROUP : WG1226639 | Shaft Seal, intermediate shaft | Fitting Position: Engine ; Height 1: 7 mm; : FPM (fluoride rubber) ; : Left-hand Twist ; : with dust lip ; Outer diameter 1: 35 mm; Inner Diameter 1: 25 mm; |
| WILMINK GROUP : WG1226640 | Shaft Seal, intermediate shaft | Fitting Position: Engine ; Inner Diameter 1: 25 mm; Height 1: 7 mm; : FPM (fluoride rubber) ; : Right-hand Twist ; : with dust lip ; Outer diameter 1: 35 mm; |
| WILMINK GROUP : WG1232747 | Shaft Seal, intermediate shaft | Fitting Position: frontal sided ; Inner Diameter 1: 60 mm; Height 1: 7 mm; : FPM (fluoride rubber)/ACM (polyacrylate rubber) ; : Right-hand Twist ; Outer diameter 1: 75 mm; |
| WILMINK GROUP : WG1232748 | Shaft Seal, intermediate shaft | Fitting Position: frontal sided ; Height 1: 7 mm; : FPM (fluoride rubber)/ACM (polyacrylate rubber) ; : Right-hand Twist ; Outer diameter 1: 85 mm; Inner Diameter 1: 70 mm; |
| WILMINK GROUP : WG1223074 | Shaft Seal, intermediate shaft | Fitting Position: frontal sided ; Outer diameter 1: 47 mm; for OE No.: 026103085D ; Inner Diameter 1: 32 mm; Height 1: 10 mm; : FPM (fluoride rubber) ; : Alternating Twist ; : with dust lip ; |
| WILMINK GROUP : WG1222238 | Shaft Seal, intermediate shaft | Fitting Position: frontal sided ; Outer diameter 1: 43 mm; Inner Diameter 1: 30 mm; Height 1: 8 mm; : FPM (fluoride rubber) ; : Right-hand Twist ; : with dust lip ; |
| WILMINK GROUP : WG1223314 | Shaft Seal, intermediate shaft | Fitting Position: Engine ; : with dust lip ; Outer diameter 1: 47 mm; Inner Diameter 1: 32 mm; Height 1: 10 mm; : FPM (fluoride rubber) ; : Right-hand Twist ; |
| WILMINK GROUP : WG1223317 | Shaft Seal, intermediate shaft | Outer diameter 1: 70 mm; Inner Diameter 1: 50 mm; Height 1: 10 mm; : FPM (fluoride rubber) ; : with mounting sleeves ; |
| WILMINK GROUP : WG1226440 | Shaft Seal, intermediate shaft | Inner Diameter 1: 54 mm; Height 1: 10 mm; : FPM (fluoride rubber) ; : Right-hand Twist ; : with dust lip ; Outer diameter 1: 72 mm; |
| WILMINK GROUP : WG1729215 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1754155 | Shaft Seal, intermediate shaft | Height: 7 mm; Radial Shaft Seal Design: ASW ; : with dust lip ; : FPM (fluoride rubber) ; Inner Diameter: 25 mm; Outer diameter: 35 mm; : Left-hand Twist ; |
| WILMINK GROUP : WG1795812 | Shaft Seal, intermediate shaft | Width: 7 mm; Weight: 0.008 kg; : FPM (fluoride rubber)/ACM (polyacrylate rubber) ; Inner Diameter: 30 mm; Outer diameter: 40 mm; |
| WILMINK GROUP : WG1754320 | Shaft Seal, intermediate shaft | Height: 10 mm; : with dust lip ; Alternative Repair Kit: WG1085139 ; : FPM (fluoride rubber) ; Inner Diameter: 32 mm; Outer diameter: 47 mm; : Alternating Twist ; Radial Shaft Seal Design: ASW ; |
| WILMINK GROUP : WG1795544 | Shaft Seal, intermediate shaft | Fitting Position: Timing End ; Thickness: 10 mm; Inner Diameter: 32 mm; Outer diameter: 47 mm; Weight: 0.03 kg; : FPM (fluoride rubber)/ACM (polyacrylate rubber) ; |
| WILMINK GROUP : WG1379936 | Shaft Seal, intermediate shaft | Height: 7 mm; Radial Shaft Seal Design: ASW ; : with dust lip ; : FPM (fluoride rubber) ; Inner Diameter: 25 mm; Outer diameter: 35 mm; : Right-hand Twist ; |
| WILMINK GROUP : WG1815937 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1817187 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1816900 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1700833 | Shaft Seal, intermediate shaft | Fitting Position: Engine ; : with dust lip ; : with mounting sleeves ; Outer diameter 1: 47 mm; Inner Diameter 1: 32 mm; Height 1: 10 mm; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; : Left-hand Twist ; |
| WILMINK GROUP : WG1862738 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1862754 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1862757 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1864527 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1864528 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1864529 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1864531 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1859452 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1859457 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1859463 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1845460 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1845461 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1847961 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1845492 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1873756 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1873760 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1836872 | Shaft Seal, intermediate shaft | Height: 10 mm; Outer diameter: 47 mm; : Left-hand Twist ; Radial Shaft Seal Design: ASW OF ; : with dust lip ; : FPM (fluoride rubber) ; Inner Diameter: 32 mm; |
| WILMINK GROUP : WG1701087 | Shaft Seal, intermediate shaft | : Left-hand Twist ; : with dust lip ; : with mounting sleeves ; Outer diameter 1: 81 mm; Inner Diameter 1: 55 mm; Height 1: 11 mm; : PTFE (polytetrafluoroethylene) ; |
| WILMINK GROUP : WG1701088 | Shaft Seal, intermediate shaft | Height 2: 13 mm; : PTFE (polytetrafluoroethylene) ; : Right-hand Twist ; : with dust lip ; : with mounting sleeves ; Outer diameter 1: 73 mm; Height 1: 11 mm; Inner Diameter 1: 55 mm; |
| WILMINK GROUP : WG1701089 | Shaft Seal, intermediate shaft | Outer diameter 1: 54 mm; Height 1: 9.5 mm; Inner Diameter 1: 40 mm; Height 2: 11 mm; : PTFE (polytetrafluoroethylene) ; : Right-hand Twist ; : with dust lip ; : with mounting sleeves ; |
| WILMINK GROUP : WG1876899 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1876446 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1875732 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1888295 | Shaft Seal, intermediate shaft | Height: 7 mm; : without dust lip ; : FPM (fluoride rubber) ; Inner Diameter: 18 mm; Outer diameter: 32 mm; Radial Shaft Seal Design: A ; |
| WILMINK GROUP : WG1983638 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1983830 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1975554 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1979091 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1979186 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1979466 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1979467 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG2064433 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG2097587 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG2097602 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG2097619 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1839860 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1840339 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG2135222 | Shaft Seal, intermediate shaft | Height 1: 10 mm; : FPM (fluoride rubber) ; : Right-hand Twist ; Outer diameter 1: 72 mm; Inner Diameter 1: 54 mm; |
| WILMINK GROUP : WG1957594 | Shaft Seal, intermediate shaft | Fitting Position: transmission sided ; Height: 7 mm; Inner Diameter: 15 mm; Outer diameter: 32 mm; : Right-hand Twist ; |
| WILMINK GROUP : WG2164814 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG2148347 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG2147520 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG2177616 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG2147616 | Shaft Seal, intermediate shaft | |
| WILMINK GROUP : WG1222765 | Shaft Seal, intermediate shaft | Fitting Position: transmission sided ; Height 1: 8 mm; : FPM (fluoride rubber) ; : Left-hand Twist ; : with dust lip ; Outer diameter 1: 88 mm; Inner Diameter 1: 70 mm; |
| WILMINK GROUP : WG1192584 | Shaft Seal, intermediate shaft | Height: 10 mm; : with mounting sleeve ; : FPM (fluoride rubber) ; Inner Diameter: 50 mm; Outer diameter: 70 mm; : Right-hand Twist ; Radial Shaft Seal Design: AW/BS ; : with dust lip ; |
| WILMINK GROUP : WG1752003 | Shaft Seal, intermediate shaft | Fitting Position: transmission sided ; Height: 7 mm; : PTFE (polytetrafluoroethylene) ; Inner Diameter: 15 mm; Outer diameter: 36 mm; : Right-hand Twist ; |
| WILMINK GROUP : WG1448725 | Shaft Seal, intermediate shaft | Width: 22 mm; Thickness: 5 mm; Length: 26 mm; |
| WILMINK GROUP : WG1957590 | Shaft Seal, intermediate shaft | Thickness: 7 mm; Outer diameter: 28 mm; : Right-hand Twist ; : FPM (fluoride rubber) ; Inner Diameter: 17 mm; |
| WILMINK GROUP : WG1957591 | Shaft Seal, intermediate shaft | Thickness: 6 mm; Inner Diameter: 25 mm; Outer diameter: 35 mm; : Right-hand Twist ; |
| WILMINK GROUP : WG1957596 | Shaft Seal, intermediate shaft | Height: 7 mm; : FPM (fluoride rubber) ; Inner Diameter: 25 mm; Outer diameter: 35 mm; : Right-hand Twist ; Radial Shaft Seal Design: ASW ; |
| WILMINK GROUP : WG1957597 | Shaft Seal, intermediate shaft | Height: 7 mm; : FPM (fluoride rubber) ; Inner Diameter: 25 mm; Outer diameter: 35 mm; : Left-hand Twist ; |
| WILMINK GROUP : WG2078960 | Shaft Seal, intermediate shaft | Width: 15.5 mm; Thickness: 3.5 mm; Length: 17.5 mm; |
| WILMINK GROUP : WG2225801 | Shaft Seal, intermediate shaft | Fitting Position: frontal sided ; Thickness: 10 mm; Weight: 0.03 kg; : FPM (fluoride rubber)/ACM (polyacrylate rubber) ; Inner Diameter: 32 mm; Outer diameter: 47 mm; |
| WILMINK GROUP : WG2225903 | Shaft Seal, intermediate shaft | Width: 7 mm; Weight: 0.008 kg; : FPM (fluoride rubber)/ACM (polyacrylate rubber) ; Inner Diameter: 30 mm; Outer diameter: 40 mm; |
| WILMINK GROUP : WG2285066 | Shaft Seal, intermediate shaft | Fitting Position: frontal sided ; Height 1: 10 mm; : FPM (fluoride rubber) ; : Alternating Twist ; : with dust lip ; Outer diameter 1: 47 mm; Inner Diameter 1: 32 mm; |
| WILMINK GROUP : WG2285446 | Shaft Seal, intermediate shaft | Fitting Position: frontal sided ; Height 1: 10 mm; : ACM (Polyacrylate) ; : Alternating Twist ; : with dust lip ; Outer diameter 1: 47 mm; Inner Diameter 1: 32 mm; |
| WILMINK GROUP : WG2285580 | Shaft Seal, intermediate shaft | Fitting Position: frontal sided ; Inner Diameter 1: 35 mm; Height 1: 7 mm; : FPM (fluoride rubber) ; : Right-hand Twist ; : with dust lip ; Outer diameter 1: 50 mm; |
共
104
条记录，分2
页显示
