参考号 | 零件 | 参数 |
---|---|---|
Schaeferbarthold : 313 02 404 03 22 | Shaft Seal, crankshaft | : Piece ; |
Schaeferbarthold : 313 02 416 03 22 | Shaft Seal, crankshaft | : Piece ; |
Schaeferbarthold : 313 02 422 03 22 | Shaft Seal, crankshaft | : Piece ; |
Schaeferbarthold : 313 06 407 03 22 | Shaft Seal, crankshaft | : Piece ; |
Schaeferbarthold : 313 06 410 03 22 | Shaft Seal, crankshaft | : Piece ; |
Schaeferbarthold : 313 06 432 03 22 | Shaft Seal, crankshaft | Fitting Position: Rear ; : Piece ; |
Schaeferbarthold : 313 06 433 03 22 | Shaft Seal, crankshaft | Fitting Position: Rear ; : Piece ; |
Schaeferbarthold : 313 06 434 03 42 | Shaft Seal, crankshaft | Inner Diameter: 40 mm; Outer diameter: 55 mm; Width: 6.4 mm; : Piece ; : PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ; Observe mounting information: ; : Right-hand Twist ; Radial Shaft Seal Design: ASW ; : with dust lip ; |
Schaeferbarthold : 313 16 401 03 22 | Shaft Seal, crankshaft | Outer diameter 1: 52 mm; Fitting Position: frontal sided ; Inner Diameter 1: 40 mm; Height 1: 7 mm; : Piece ; : FPM (fluoride rubber) ; : Right-hand Twist ; : with dust lip ; |
Schaeferbarthold : 313 16 407 03 22 | Shaft Seal, crankshaft | Fitting Position: Rear ; Inner Diameter: 78 mm; Outer diameter: 100 mm; Thickness: 9 mm; : Piece ; |
Schaeferbarthold : 313 16 408 03 42 | Shaft Seal, crankshaft | Outer diameter 1: 52 mm; Fitting Position: Timing End ; Inner Diameter 1: 40 mm; Height 1: 7 mm; : Piece ; : FPM (fluoride rubber) ; : Right-hand Twist ; : with dust lip ; |
Schaeferbarthold : 313 16 409 03 22 | Shaft Seal, crankshaft | Outer diameter 1: 52 mm; Fitting Position: frontal sided ; Inner Diameter 1: 40 mm; Height 1: 6 mm; : FPM (fluoride rubber) ; : Right-hand Twist ; : with dust lip ; : Piece ; for OE No.: 214212 ; |
Schaeferbarthold : 313 16 417 03 42 | Shaft Seal, crankshaft | Fitting Position: Transmission End ; Inner Diameter: 87 mm; Outer diameter: 100 mm; Width: 8 mm; : with dust lip ; : Piece ; : FPM (fluoride rubber) ; : Left-hand Twist ; Radial Shaft Seal Design: AS ; |
Schaeferbarthold : 313 16 441 03 22 | Shaft Seal, crankshaft | Fitting Position: transmission sided ; Inner Diameter: 80 mm; Outer diameter: 98 mm; Thickness: 10 mm; : Piece ; |
Schaeferbarthold : 313 18 116 03 23 | Shaft Seal, crankshaft | : Piece ; |
Schaeferbarthold : 313 18 400 03 23 | Shaft Seal, crankshaft | Inner Diameter: 32 mm; Outer diameter: 42 mm; : Piece ; |
Schaeferbarthold : 313 18 401 03 43 | Shaft Seal, crankshaft | Inner Diameter: 85 mm; : Left-hand Twist ; Radial Shaft Seal Design: IWD ; : with housing ; : Piece ; : with mounting sleeve ; : PTFE (polytetrafluoroethylene) ; |
Schaeferbarthold : 313 18 407 03 23 | Shaft Seal, crankshaft | Outer diameter 1: 47 mm; Inner Diameter 1: 32 mm; Height 1: 10 mm; for OE No.: 026103085D ; |
Schaeferbarthold : 313 18 411 02 23 | Shaft Seal, crankshaft | Fitting Position: Timing End ; Outer diameter 1: 48 mm; Inner Diameter 1: 35 mm; Height 1: 10 mm; : Right-hand Twist ; : with dust lip ; : Piece ; : with mounting sleeves ; : PTFE (polytetrafluoroethylene) ; |
Schaeferbarthold : 313 18 419 03 23 | Shaft Seal, crankshaft | Fitting Position: Transmission End ; Inner Diameter: 80 mm; Observe service information: ; Weight: 0.148 kg; : PTFE (polytetrafluoroethylene) ; : Piece ; : with flange ; for OE No.: 06K 103 171 G ; |
Schaeferbarthold : 313 18 930 03 23 | Shaft Seal, crankshaft | : Piece ; |
Schaeferbarthold : 313 26 414 02 42 | Shaft Seal, crankshaft | : Piece ; |
Schaeferbarthold : 313 26 415 03 42 | Shaft Seal, crankshaft | : Piece ; |
Schaeferbarthold : 313 26 420 03 22 | Shaft Seal, crankshaft | : Piece ; |
Schaeferbarthold : 313 26 421 03 22 | Shaft Seal, crankshaft | : Piece ; |
Schaeferbarthold : 313 26 423 03 42 | Shaft Seal, crankshaft | Outer diameter 1: 75 mm; Fitting Position: Timing End ; Inner Diameter 1: 61 mm; Height 1: 8 mm; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; : Right-hand Twist ; : with dust lip ; : Piece ; |
Schaeferbarthold : 313 26 427 03 42 | Shaft Seal, crankshaft | Inner Diameter: 40 mm; Outer diameter: 55 mm; Width: 6.4 mm; Radial Shaft Seal Design: ASW ; : with dust lip ; : Piece ; : PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ; Observe mounting information: ; : Right-hand Twist ; |
Schaeferbarthold : 313 26 432 03 42 | Shaft Seal, crankshaft | Fitting Position: Timing End ; Outer diameter 1: 66 mm; Inner Diameter 1: 42 mm; Height 1: 7 mm; : Right-hand Twist ; : with dust lip ; : Piece ; : with mounting sleeves ; : PTFE (polytetrafluoroethylene) ; |
Schaeferbarthold : 313 26 439 03 22 | Shaft Seal, crankshaft | : Piece ; |
Schaeferbarthold : 313 27 414 02 42 | Shaft Seal, crankshaft | Outer diameter 1: 110 mm; Fitting Position: Transmission End ; Inner Diameter 1: 90 mm; Height 1: 7 mm; : FPM (fluoride rubber)/ACM (polyacrylate rubber) ; : Left-hand Twist ; : with dust lip ; : Piece ; |
Schaeferbarthold : 313 27 415 03 42 | Shaft Seal, crankshaft | Outer diameter 1: 62 mm; Fitting Position: Timing End ; Inner Diameter 1: 42 mm; Height 1: 7 mm; : with dust lip ; : Piece ; : FPM (fluoride rubber)/ACM (polyacrylate rubber) ; : Right-hand Twist ; |
Schaeferbarthold : 313 27 420 03 22 | Shaft Seal, crankshaft | : Piece ; |
Schaeferbarthold : 313 27 421 03 22 | Shaft Seal, crankshaft | Inner Diameter: 85 mm; Outer diameter: 105 mm; Thickness: 8.8 mm; : Piece ; |
Schaeferbarthold : 313 27 423 03 42 | Shaft Seal, crankshaft | Outer diameter 1: 75 mm; Fitting Position: Timing End ; Inner Diameter 1: 61 mm; Height 1: 8 mm; : with dust lip ; : Piece ; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; : Right-hand Twist ; |
Schaeferbarthold : 313 27 427 03 42 | Shaft Seal, crankshaft | Inner Diameter: 40 mm; Outer diameter: 55 mm; Width: 6.4 mm; : Right-hand Twist ; Radial Shaft Seal Design: ASW ; : with dust lip ; : Piece ; : PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ; Observe mounting information: ; |
Schaeferbarthold : 313 27 432 03 42 | Shaft Seal, crankshaft | Fitting Position: Timing End ; Outer diameter 1: 66 mm; Inner Diameter 1: 42 mm; Height 1: 7 mm; : with mounting sleeves ; : PTFE (polytetrafluoroethylene) ; : Right-hand Twist ; : with dust lip ; : Piece ; |
Schaeferbarthold : 313 27 439 03 22 | Shaft Seal, crankshaft | : Piece ; |
Schaeferbarthold : 313 28 405 03 22 | Shaft Seal, crankshaft | Inner Diameter: 80 mm; Fitting Position: Transmission End ; Outer diameter: 100 mm; Width: 9 mm; : Left-hand Twist ; Radial Shaft Seal Design: ASW ; : with dust lip ; : Piece ; |
Schaeferbarthold : 313 28 409 03 42 | Shaft Seal, crankshaft | Inner Diameter: 32 mm; Outer diameter: 44 mm; Width: 6 mm; : Piece ; : PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ; : with mounting sleeve ; Observe mounting information: ; : Right-hand Twist ; Radial Shaft Seal Design: ASW ; : with dust lip ; |
Schaeferbarthold : 313 28 412 03 22 | Shaft Seal, crankshaft | Fitting Position: Timing End ; Inner Diameter: 35 mm; Outer diameter: 47 mm; Thickness: 7 mm; Radial Shaft Seal Design: ASW ; : with dust lip ; : Piece ; : with mounting sleeve ; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; |
Schaeferbarthold : 313 28 417 02 42 | Shaft Seal, crankshaft | : Piece ; |
Schaeferbarthold : 313 28 419 03 42 | Shaft Seal, crankshaft | Fitting Position: Timing End ; Outer diameter 1: 81 mm; Inner Diameter 1: 50 mm; Height 1: 11.5 mm; : PTFE (polytetrafluoroethylene) ; : Piece ; : with flange ; |
Schaeferbarthold : 313 28 420 03 22 | Shaft Seal, crankshaft | Fitting Position: Timing End ; Outer diameter 1: 75 mm; Inner Diameter 1: 60 mm; Height 1: 7 mm; : FPM (fluoride rubber)/ACM (polyacrylate rubber) ; : Right-hand Twist ; : Piece ; |
Schaeferbarthold : 313 28 425 03 42 | Shaft Seal, crankshaft | Fitting Position: transmission sided ; Outer diameter 1: 105 mm; Inner Diameter 1: 85 mm; Height 1: 6.8 mm; Height 2: 11 mm; : with dust lip ; : Piece ; : FPM (fluoride rubber) ; : Left-hand Twist ; |
Schaeferbarthold : 313 28 434 03 42 | Shaft Seal, crankshaft | Inner Diameter: 32 mm; Outer diameter: 44 mm; Width: 6 mm; : Right-hand Twist ; Radial Shaft Seal Design: ASW ; : with dust lip ; : Piece ; : FPM (fluoride rubber) ; |
Schaeferbarthold : 313 28 435 03 42 | Shaft Seal, crankshaft | Outer diameter 1: 75 mm; Fitting Position: Timing End ; Inner Diameter 1: 60 mm; Height 1: 7 mm; : FPM (fluoride rubber)/ACM (polyacrylate rubber) ; : Right-hand Twist ; : Piece ; |
Schaeferbarthold : 313 18 407 03 22 | Shaft Seal, crankshaft | Outer diameter 1: 47 mm; Fitting Position: frontal sided ; Inner Diameter 1: 32 mm; Height 1: 10 mm; for OE No.: 026103085D ; : FPM (fluoride rubber) ; : Alternating Twist ; : with dust lip ; : Piece ; |
联系客服