t a  e 
  • Home
  • Third-party data
  • DURAGO
  • BD920132

Third-party dataDURAGO : BD920132

Drum
DURAGO : BD920132

  • No
  • 4.25
  • 108
  • 4
  • M12 x 1.5
  • 1.77
  • 45
  • 2.49
  • 63.3
  • Full Cast
  • 3.21
  • 81.5
  • Cast Iron
  • 8.04
  • 204.3
  • 7.99
  • 203
  • No
  • 9.41
  • 238.9
  • No

Model

FORD
FOCUS
2.0L L4
2009
w/o ABS ring
Rear; CAUTION: Always install a new wheel hub retaining nut after loosening or when nut is not tightened to specifications. Torque to 173 ft-lbs (235 Nm) while rotating. When tightening the new wheel hub nut, rotate the brake drum counterclockwise until the correct torque is achieved or damage to the wheel bearing may occur. A new dust cap and dust shield must be installed or damage to the wheel bearing may occur.
2010
w/o ABS ring
Rear; CAUTION: Always install a new wheel hub retaining nut after loosening or when nut is not tightened to specifications. Torque to 173 ft-lbs (235 Nm) while rotating. When tightening the new wheel hub nut, rotate the brake drum counterclockwise until the correct torque is achieved or damage to the wheel bearing may occur. A new dust cap and dust shield must be installed or damage to the wheel bearing may occur.
2011
w/o ABS ring
Rear; CAUTION: Always install a new wheel hub retaining nut after loosening or when nut is not tightened to specifications. Torque to 173 ft-lbs (235 Nm) while rotating. When tightening the new wheel hub nut, rotate the brake drum counterclockwise until the correct torque is achieved or damage to the wheel bearing may occur. A new dust cap and dust shield must be installed or damage to the wheel bearing may occur.
2.5L L5 Turbocharged
2009
w/o ABS ring
Rear; CAUTION: Always install a new wheel hub retaining nut after loosening or when nut is not tightened to specifications. Torque to 173 ft-lbs (235 Nm) while rotating. When tightening the new wheel hub nut, rotate the brake drum counterclockwise until the correct torque is achieved or damage to the wheel bearing may occur. A new dust cap and dust shield must be installed or damage to the wheel bearing may occur.
2010
w/o ABS ring
Rear; CAUTION: Always install a new wheel hub retaining nut after loosening or when nut is not tightened to specifications. Torque to 173 ft-lbs (235 Nm) while rotating. When tightening the new wheel hub nut, rotate the brake drum counterclockwise until the correct torque is achieved or damage to the wheel bearing may occur. A new dust cap and dust shield must be installed or damage to the wheel bearing may occur.

OE Number

Make Number
DUR 92013*

    Size/Parameters

    Annotated Parameter name Size range Unit
        

    Annotate an instance