- Home
- Third-party data
- WILMINK GROUP
- Shaft Seal, differential
| REF NO. | Part categories | Parameter |
|---|---|---|
| WILMINK GROUP : WG1221023 | Shaft Seal, differential | Outer Diameter 1: 62 mm; Inner Diameter 1: 45 mm; Height 1: 8 mm; Height 2: 13 mm; Material: ACM (Polyacrylate) ; Swirl Type: Right-hand Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1222250 | Shaft Seal, differential | Fitting Position: Drive Axle ; Outer Diameter 1: 80 mm; Inner Diameter 1: 50 mm; Height 1: 8 mm; Material: NBR (nitrile butadiene rubber) ; |
| WILMINK GROUP : WG1222257 | Shaft Seal, differential | Fitting Position: Drive Axle ; Outer Diameter 1: 47 mm; Inner Diameter 1: 30 mm; Height 1: 10 mm; Material: NBR (nitrile butadiene rubber) ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1222273 | Shaft Seal, differential | Fitting Position: Drive Axle ; Outer Diameter 1: 65 mm; Inner Diameter 1: 45 mm; Height 1: 10 mm; Material: ACM (Polyacrylate) ; |
| WILMINK GROUP : WG1222277 | Shaft Seal, differential | Fitting Position: Drive Axle ; Outer Diameter 1: 97.7 mm; Inner Diameter 1: 70 mm; Height 1: 14 mm; Height 2: 19.5 mm; Material: ACM (Polyacrylate) ; |
| WILMINK GROUP : WG1222279 | Shaft Seal, differential | Outer Diameter 1: 35 mm; Inner Diameter 1: 23 mm; Height 1: 8.5 mm; Material: ACM (Polyacrylate) ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1222288 | Shaft Seal, differential | Fitting Position: Drive Axle ; Outer Diameter 1: 42 mm; Inner Diameter 1: 30 mm; Height 1: 14 mm; Material: NBR (nitrile butadiene rubber) ; |
| WILMINK GROUP : WG1222812 | Shaft Seal, differential | Fitting Position: Drive Axle ; Outer Diameter 1: 68 mm; Inner Diameter 1: 54 mm; Height 1: 12 mm; Material: NBR (nitrile butadiene rubber) ; |
| WILMINK GROUP : WG1222834 | Shaft Seal, differential | Fitting Position: Rear Axle ; Outer Diameter 1: 110 mm; Inner Diameter 1: 90 mm; Height 1: 13 mm; Material: NBR (nitrile butadiene rubber) ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1222835 | Shaft Seal, differential | Fitting Position: Front Axle ; Outer Diameter 1: 120 mm; Inner Diameter 1: 90 mm; Height 1: 13 mm; Material: NBR (nitrile butadiene rubber) ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1222837 | Shaft Seal, differential | Fitting Position: Rear Axle ; Outer Diameter 1: 130 mm; Inner Diameter 1: 100 mm; Height 1: 13 mm; Material: NBR (nitrile butadiene rubber) ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1223328 | Shaft Seal, differential | Outer Diameter 1: 90 mm; Inner Diameter 1: 60 mm; Height 1: 13 mm; Material: FPM (fluoride rubber) ; Swirl Type: Alternating Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1223330 | Shaft Seal, differential | Fitting Position: Drive Axle ; Outer Diameter 1: 105 mm; Inner Diameter 1: 72 mm; Height 1: 13 mm; Material: FPM (fluoride rubber) ; Swirl Type: Alternating Twist ; |
| WILMINK GROUP : WG1223331 | Shaft Seal, differential | Outer Diameter 1: 150 mm; Inner Diameter 1: 80 mm; Height 1: 12 mm; Height 2: 20 mm; Material: FPM (fluoride rubber) ; Swirl Type: Right-hand Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1223332 | Shaft Seal, differential | Outer Diameter 1: 130.2 mm; Inner Diameter 1: 80 mm; Height 1: 12 mm; Height 2: 20 mm; Material: FPM (fluoride rubber) ; Swirl Type: Right-hand Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1223333 | Shaft Seal, differential | Outer Diameter 1: 125.3 mm; Inner Diameter 1: 90 mm; Height 1: 10 mm; Material: FPM (fluoride rubber) ; Swirl Type: Right-hand Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1223338 | Shaft Seal, differential | Outer Diameter 1: 52 mm; Inner Diameter 1: 29.8 mm; Height 1: 10 mm; Height 2: 13.5 mm; Material: ACM (Polyacrylate) ; Swirl Type: Left-hand Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1223339 | Shaft Seal, differential | Fitting Position: Outlet ; Outer Diameter 1: 50 mm; Inner Diameter 1: 29.8 mm; Height 1: 10 mm; Height 2: 13.5 mm; Material: ACM (Polyacrylate) ; Swirl Type: Right-hand Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1223355 | Shaft Seal, differential | Fitting Position: Drive Axle ; Outer Diameter 1: 110 mm; Inner Diameter 1: 88 mm; Height 1: 12 mm; Material: ACM (Polyacrylate) ; Swirl Type: Alternating Twist ; |
| WILMINK GROUP : WG1223358 | Shaft Seal, differential | Fitting Position: Drive Axle ; Outer Diameter 1: 140 mm; Inner Diameter 1: 112 mm; Height 1: 16 mm; Material: NBR (nitrile butadiene rubber) ; |
| WILMINK GROUP : WG1223904 | Shaft Seal, differential | Fitting Position: Drive Axle ; Outer Diameter 1: 115 mm; Inner Diameter 1: 80 mm; Height 1: 12 mm; Material: NBR (nitrile butadiene rubber) ; |
| WILMINK GROUP : WG1223926 | Shaft Seal, differential | Outer Diameter 1: 54 mm; Inner Diameter 1: 36 mm; Height 1: 10 mm; Height 2: 13.5 mm; Material: ACM (Polyacrylate) ; Swirl Type: Right-hand Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1223928 | Shaft Seal, differential | Outer Diameter 1: 151 mm; Inner Diameter 1: 90 mm; Height 1: 11 mm; Height 2: 18 mm; for OE No.: 21448461 ; Material: FPM (fluoride rubber) ; Swirl Type: Right-hand Twist ; |
| WILMINK GROUP : WG1223929 | Shaft Seal, differential | Fitting Position: outer ; Outer Diameter 1: 65 mm; Inner Diameter 1: 45 mm; Height 1: 27 mm; Material: NBR (nitrile butadiene rubber) ; |
| WILMINK GROUP : WG1224495 | Shaft Seal, differential | Outer Diameter 1: 78 mm; Inner Diameter 1: 45 mm; Height 1: 11 mm; Height 2: 18 mm; Material: ACM (Polyacrylate) ; |
| WILMINK GROUP : WG1224536 | Shaft Seal, differential | Outer Diameter 1: 90 mm; Inner Diameter 1: 46 mm; Height 1: 11 mm; Height 2: 16 mm; Material: ACM (Polyacrylate) ; |
| WILMINK GROUP : WG1224538 | Shaft Seal, differential | Outer Diameter 1: 76 mm; Inner Diameter 1: 60 mm; Height 1: 9 mm; Material: ACM (Polyacrylate) ; |
| WILMINK GROUP : WG1224539 | Shaft Seal, differential | Outer Diameter 1: 56 mm; Inner Diameter 1: 33 mm; Height 1: 8 mm; Height 2: 13 mm; Material: ACM (Polyacrylate) ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1225211 | Shaft Seal, differential | Outer Diameter 1: 74 mm; Inner Diameter 1: 40 mm; Height 1: 9.5 mm; Height 2: 18.8 mm; Material: ACM (Polyacrylate) ; Swirl Type: Right-hand Twist ; |
| WILMINK GROUP : WG1225212 | Shaft Seal, differential | Outer Diameter 1: 46 mm; Inner Diameter 1: 30 mm; Height 1: 8 mm; Material: ACM (Polyacrylate) ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1225216 | Shaft Seal, differential | Outer Diameter 1: 54 mm; Inner Diameter 1: 35 mm; Height 1: 9.5 mm; Height 2: 13.5 mm; Material: ACM (Polyacrylate) ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1225217 | Shaft Seal, differential | Outer Diameter 1: 73 mm; Inner Diameter 1: 35 mm; Height 1: 8.1 mm; Height 2: 13.9 mm; Material: ACM (Polyacrylate) ; |
| WILMINK GROUP : WG1225239 | Shaft Seal, differential | Fitting Position: Drive Axle ; Outer Diameter 1: 63 mm; Inner Diameter 1: 34 mm; Height 1: 9 mm; Height 2: 15.5 mm; Material: ACM (Polyacrylate) ; |
| WILMINK GROUP : WG1226442 | Shaft Seal, differential | Outer Diameter 1: 50 mm; Inner Diameter 1: 32 mm; Height 1: 10 mm; Material: FPM (fluoride rubber) ; Swirl Type: Right-hand Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1754644 | Shaft Seal, differential | Inner Diameter: 63.5 mm; Height: 10.5 mm; Outer Diameter: 102 mm; Material: ACM (Polyacrylate) ; Swirl Type: Left-hand Twist ; Radial Shaft Seal Design: AWD ; Dust Cover: without dust lip ; |
| WILMINK GROUP : WG1791184 | Shaft Seal, differential | Inner Diameter: 44 mm; Height: 10 mm; Outer Diameter: 90 mm; Material: ACM (Polyacrylate) ; |
| WILMINK GROUP : WG1754243 | Shaft Seal, differential | Inner Diameter: 43 mm; Height: 10 mm; Outer Diameter: 75 mm; Material: FPM (fluoride rubber) ; Swirl Type: Left-hand Twist ; Radial Shaft Seal Design: ASW ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1754843 | Shaft Seal, differential | Inner Diameter: 35 mm; Height: 9 mm; Outer Diameter: 55 mm; Material: ACM (Polyacrylate) ; Swirl Type: Alternating Twist ; Radial Shaft Seal Design: SP ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1755388 | Shaft Seal, differential | Outer Diameter 1: 62 mm; Inner Diameter 1: 40 mm; Height 1: 8 mm; Material: ACM (Polyacrylate) ; Swirl Type: Alternating Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1754481 | Shaft Seal, differential | Inner Diameter: 48 mm; Height: 8 mm; Outer Diameter: 68 mm; Material: ACM (Polyacrylate) ; Swirl Type: Left-hand Twist ; Radial Shaft Seal Design: AW/BS ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1754502 | Shaft Seal, differential | Inner Diameter: 35 mm; Height: 10 mm; Outer Diameter: 54 mm; Height 2: 15 mm; Material: ACM (Polyacrylate) ; Swirl Type: Alternating Twist ; Radial Shaft Seal Design: AW/BS ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1755392 | Shaft Seal, differential | Outer Diameter 1: 73 mm; Inner Diameter 1: 54 mm; Height 1: 8 mm; Material: ACM (Polyacrylate) ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1755396 | Shaft Seal, differential | Outer Diameter 1: 65 mm; Inner Diameter 1: 34 mm; Height 1: 8 mm; Material: ACM (Polyacrylate) ; Swirl Type: Alternating Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1754519 | Shaft Seal, differential | Inner Diameter: 50 mm; Height: 8 mm; Outer Diameter: 65 mm; Material: ACM (Polyacrylate) ; Swirl Type: Alternating Twist ; Radial Shaft Seal Design: A/BS ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1755429 | Shaft Seal, differential | Outer Diameter 1: 83 mm; Inner Diameter 1: 65 mm; Height 1: 8 mm; Material: ACM (Polyacrylate) ; Swirl Type: Alternating Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1755431 | Shaft Seal, differential | Outer Diameter 1: 50 mm; Inner Diameter 1: 29.8 mm; Height 1: 10 mm; Material: ACM (Polyacrylate) ; |
| WILMINK GROUP : WG1755433 | Shaft Seal, differential | Outer Diameter 1: 50 mm; Inner Diameter 1: 29.8 mm; Height 1: 10 mm; Material: NBR (Nitrile Butadiene Rubber)/ACM (Polyacrylic Rubber) ; Swirl Type: Right-hand Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1755434 | Shaft Seal, differential | Outer Diameter 1: 52 mm; Inner Diameter 1: 32 mm; Height 1: 10 mm; Material: ACM (Polyacrylate) ; Swirl Type: Left-hand Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1755472 | Shaft Seal, differential | Outer Diameter 1: 55 mm; Inner Diameter 1: 40 mm; Height 1: 7 mm; Material: ACM (Polyacrylate) ; Swirl Type: Right-hand Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1816234 | Shaft Seal, differential | |
| WILMINK GROUP : WG1481982 | Shaft Seal, differential | Inner Diameter: 40 mm; Height: 10.2 mm; Outer Diameter: 55 mm; Material: ACM (Polyacrylate) ; Swirl Type: Alternating Twist ; Radial Shaft Seal Design: A/BS ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1500717 | Shaft Seal, differential | Fitting Position: Right ; Inner Diameter: 32 mm; Height: 12 mm; Outer Diameter: 50 mm; Material: FPM (fluoride rubber) ; Swirl Type: Right-hand Twist ; Radial Shaft Seal Design: ASW BD ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1701216 | Shaft Seal, differential | Fitting Position: Inlet ; Outer Diameter 1: 82 mm; Inner Diameter 1: 48 mm; Height 1: 12 mm; Material: FPM (fluoride rubber) ; Swirl Type: Right-hand Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1701222 | Shaft Seal, differential | Outer Diameter 1: 130 mm; Inner Diameter 1: 85 mm; Height 1: 16.5 mm; Material: FPM (fluoride rubber)/ACM (polyacrylate rubber) ; Swirl Type: Right-hand Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1701223 | Shaft Seal, differential | Outer Diameter 1: 102 mm; Inner Diameter 1: 68 mm; Height 1: 9.5 mm; Material: FPM (fluoride rubber) ; Swirl Type: Left-hand Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1701224 | Shaft Seal, differential | Fitting Position: Inlet ; Outer Diameter 1: 88 mm; Inner Diameter 1: 55 mm; Height 1: 11 mm; Material: ACM (Polyacrylate) ; Swirl Type: Right-hand Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1701313 | Shaft Seal, differential | Fitting Position: Drive Axle ; Outer Diameter 1: 55 mm; Inner Diameter 1: 40 mm; Outer Diameter 2: 62 mm; Height 1: 13 mm; Material: ACM (Polyacrylate) ; Swirl Type: Alternating Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1701320 | Shaft Seal, differential | Outer Diameter 1: 58 mm; Inner Diameter 1: 40 mm; Height 1: 10 mm; Material: ACM (Polyacrylate) ; |
| WILMINK GROUP : WG1701321 | Shaft Seal, differential | Outer Diameter 1: 62 mm; Inner Diameter 1: 40 mm; Height 1: 10 mm; Material: ACM (Polyacrylate) ; |
| WILMINK GROUP : WG1700767 | Shaft Seal, differential | Outer Diameter 1: 70 mm; Inner Diameter 1: 42 mm; Height 1: 8 mm; Height 2: 14 mm; Material: ACM (Polyacrylate) ; Swirl Type: Right-hand Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1700768 | Shaft Seal, differential | Outer Diameter 1: 84.5 mm; Inner Diameter 1: 51.5 mm; Height 1: 10 mm; Height 2: 15 mm; Material: ACM (Polyacrylate) ; Swirl Type: Right-hand Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1700770 | Shaft Seal, differential | Outer Diameter 1: 78 mm; Inner Diameter 1: 50 mm; Height 1: 10 mm; Height 2: 15 mm; Material: ACM (Polyacrylate) ; Swirl Type: Right-hand Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1701347 | Shaft Seal, differential | Outer Diameter 1: 75 mm; Inner Diameter 1: 45 mm; Height 1: 9 mm; Material: ACM (Polyacrylate) ; Swirl Type: Alternating Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1701357 | Shaft Seal, differential | Outer Diameter 1: 98.3 mm; Inner Diameter 1: 47 mm; Height 1: 13 mm; Material: ACM (Polyacrylate) ; Swirl Type: Alternating Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1701358 | Shaft Seal, differential | Outer Diameter 1: 88 mm; Inner Diameter 1: 49 mm; Height 1: 12.5 mm; Material: ACM (Polyacrylate) ; Swirl Type: Right-hand Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1700771 | Shaft Seal, differential | Fitting Position: Front Axle ; Outer Diameter 1: 74.2 mm; Inner Diameter 1: 45 mm; Height 1: 10 mm; Height 2: 15 mm; Material: ACM (Polyacrylate) ; Swirl Type: Left-hand Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1700772 | Shaft Seal, differential | Fitting Position: Outlet ; Outer Diameter 1: 47 mm; Inner Diameter 1: 33 mm; Height 1: 7 mm; Height 2: 8.5 mm; Material: ACM (Polyacrylate) ; Swirl Type: Left-hand Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1700773 | Shaft Seal, differential | Fitting Position: Outlet ; Outer Diameter 1: 55 mm; Inner Diameter 1: 40 mm; Height 1: 7 mm; Height 2: 8.5 mm; Material: ACM (Polyacrylate) ; Swirl Type: Right-hand Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1700774 | Shaft Seal, differential | Fitting Position: Outlet ; Outer Diameter 1: 52 mm; Inner Diameter 1: 40 mm; Height 1: 8 mm; Material: ACM (Polyacrylate) ; Swirl Type: Alternating Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1700784 | Shaft Seal, differential | Outer Diameter 1: 63 mm; Inner Diameter 1: 40 mm; Height 1: 10 mm; Material: ACM (Polyacrylate) ; Swirl Type: Left-hand Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1700831 | Shaft Seal, differential | Fitting Position: front propshaft at differential ; Outer Diameter 1: 90 mm; Inner Diameter 1: 60 mm; Height 1: 10 mm; Material: NBR (nitrile butadiene rubber) ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1700832 | Shaft Seal, differential | Outer Diameter 1: 47.5 mm; Inner Diameter 1: 32 mm; Height 1: 9.5 mm; Height 2: 10.5 mm; Material: NBR (nitrile butadiene rubber) ; Swirl Type: Alternating Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1469430 | Shaft Seal, differential | |
| WILMINK GROUP : WG1700941 | Shaft Seal, differential | Fitting Position: Outlet ; Outer Diameter 1: 70 mm; Inner Diameter 1: 58 mm; Height 1: 8 mm; Material: ACM (Polyacrylate) ; Swirl Type: Alternating Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1700964 | Shaft Seal, differential | Fitting Position: Left ; Outer Diameter 1: 88 mm; Inner Diameter 1: 65 mm; Height 1: 8 mm; Material: ACM (Polyacrylate) ; Swirl Type: Alternating Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1701009 | Shaft Seal, differential | Fitting Position: outer ; Outer Diameter 1: 75 mm; Inner Diameter 1: 40 mm; Height 1: 8 mm; Material: ACM (Polyacrylate) ; Swirl Type: Alternating Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1701010 | Shaft Seal, differential | Fitting Position: outer ; Outer Diameter 1: 45.3 mm; Inner Diameter 1: 34.7 mm; Height 1: 7 mm; Material: ACM (Polyacrylate) ; |
| WILMINK GROUP : WG1701033 | Shaft Seal, differential | Fitting Position: Rear Axle ; Outer Diameter 1: 114 mm; Inner Diameter 1: 72 mm; Height 1: 10 mm; Material: ACM (Polyacrylate) ; Swirl Type: Alternating Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1701034 | Shaft Seal, differential | Fitting Position: Drive Axle ; Outer Diameter 1: 98 mm; Inner Diameter 1: 75 mm; Height 1: 10 mm; Material: FPM (fluoride rubber) ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1701035 | Shaft Seal, differential | Fitting Position: Outlet ; Outer Diameter 1: 64 mm; Inner Diameter 1: 40 mm; Outer Diameter 2: 71 mm; Height 1: 7.5 mm; Height 2: 12.5 mm; Material: ACM (Polyacrylate) ; |
| WILMINK GROUP : WG1225504 | Shaft Seal, differential | Outer Diameter 1: 111 mm; Inner Diameter 1: 91 mm; Height 1: 7.5 mm; Material: FPM (fluoride rubber) ; Swirl Type: Left-hand Twist ; |
| WILMINK GROUP : WG1220376 | Shaft Seal, differential | Fitting Position: Drive Axle ; Outer Diameter 1: 52 mm; Inner Diameter 1: 35 mm; Height 1: 10 mm; Material: ACM (Polyacrylate) ; Swirl Type: Alternating Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1220402 | Shaft Seal, differential | Fitting Position: Drive Axle ; Outer Diameter 1: 72 mm; Inner Diameter 1: 45 mm; Height 1: 15 mm; Height 2: 10 mm; Material: NBR (nitrile butadiene rubber) ; Swirl Type: Alternating Twist ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1222492 | Shaft Seal, differential | Outer Diameter 1: 52 mm; Inner Diameter 1: 32 mm; Height 1: 7 mm; Material: NBR (nitrile butadiene rubber) ; |
| WILMINK GROUP : WG1859460 | Shaft Seal, differential | |
| WILMINK GROUP : WG1854722 | Shaft Seal, differential | |
| WILMINK GROUP : WG1854724 | Shaft Seal, differential | |
| WILMINK GROUP : WG1766200 | Shaft Seal, differential | Fitting Position: Outlet ; Outer Diameter 1: 58 mm; Inner Diameter 1: 40 mm; Height 1: 10 mm; Material: NBR (nitrile butadiene rubber) ; |
| WILMINK GROUP : WG1755532 | Shaft Seal, differential | Outer Diameter 1: 180.8 mm; Inner Diameter 1: 86.5 mm; Height 1: 25.6 mm; Material: HNBR (hydrogenated nitrile butadiene rubber) ; |
| WILMINK GROUP : WG1904070 | Shaft Seal, differential | Inner Diameter: 40 mm; Height: 11 mm; Outer Diameter: 52 mm; Material: ACM (Polyacrylate) ; Swirl Type: Right-hand Twist ; Radial Shaft Seal Design: ASW ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1904071 | Shaft Seal, differential | Inner Diameter: 33 mm; Height: 8.5 mm; Outer Diameter: 47 mm; Material: ACM (Polyacrylate) ; Swirl Type: Left-hand Twist ; Radial Shaft Seal Design: ASW ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1904046 | Shaft Seal, differential | Inner Diameter: 40 mm; Height: 7 mm; Outer Diameter: 55 mm; Material: ACM (Polyacrylate) ; Swirl Type: Right-hand Twist ; Radial Shaft Seal Design: A/BS2 ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1904047 | Shaft Seal, differential | Fitting Position: Left ; Inner Diameter: 40 mm; Height: 13.5 mm; Outer Diameter: 55 mm; Material: FPM (fluoride rubber) ; Radial Shaft Seal Design: SP ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1904000 | Shaft Seal, differential | Inner Diameter: 45 mm; Height: 9 mm; Outer Diameter: 65 mm; Material: ACM (Polyacrylate) ; Swirl Type: Alternating Twist ; Radial Shaft Seal Design: ASW ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1190478 | Shaft Seal, differential | Inner Diameter: 44 mm; Height: 10 mm; Outer Diameter: 67 mm; Material: ACM (Polyacrylate) ; Swirl Type: Alternating Twist ; Radial Shaft Seal Design: ASW ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1250076 | Shaft Seal, differential | Inner Diameter: 44 mm; Height: 15.5 mm; Outer Diameter: 78.1 mm; Height 1: 10 mm; Material: ACM (Polyacrylate) ; Swirl Type: Alternating Twist ; Radial Shaft Seal Design: AB SL ; |
| WILMINK GROUP : WG1701532 | Shaft Seal, differential | Outer Diameter 1: 150 mm; Inner Diameter 1: 85 mm; Height 1: 16.3 mm; Height 2: 24 mm; Material: FPM (fluoride rubber) ; |
| WILMINK GROUP : WG1701592 | Shaft Seal, differential | Fitting Position: Drive Axle ; Outer Diameter 1: 60 mm; Inner Diameter 1: 40 mm; Height 1: 10 mm; Material: NBR (nitrile butadiene rubber) ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1701593 | Shaft Seal, differential | Fitting Position: Drive Axle ; Outer Diameter 1: 65 mm; Inner Diameter 1: 45 mm; Height 1: 10 mm; Material: NBR (nitrile butadiene rubber) ; Dust Cover: with dust lip ; |
| WILMINK GROUP : WG1920529 | Shaft Seal, differential | Inner Diameter: 45 mm; Height: 9 mm; Outer Diameter: 75 mm; Material: ACM (Polyacrylate) ; Swirl Type: Alternating Twist ; Radial Shaft Seal Design: ASW ; Dust Cover: with dust lip ; |
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10]
[11]
[12]
[13]
[14]
[15]
[16]
[17]
[18]
[19]
[20]
[21]
[22]
Records:
2188
, Page22
