| 参考号 | 零件 | 参数 |
|---|---|---|
| Stark : SKFU-0410307 | Fuel Feed Unit | Fitting Position: in fuel tank ; Voltage: 12 V; Operating Pressure: 3 bar; Operating Mode: Electric ; Fuel Type: Petrol ; Supplementary Article/Supplementary Info: with fuel sender unit ; Flow rate: 74 l/h; |
| Stark : SKFU-0410313 | Fuel Feed Unit | Fitting Position: in fuel tank ; Operating Pressure: 4.6 bar; Fuel Type: Diesel ; Supplementary Article/Supplementary Info: with fuel sender unit ; Number of pins: 4 -pin connector; Number of inlets/outlets: 1 ; Operating Voltage: 12.5 V; |
| Stark : SKFU-0410314 | Fuel Feed Unit | Fitting Position: in fuel tank ; Operating Mode: Electric ; Fuel Type: Petrol ; Sensor Type: Lever Sensor ; Supplementary Article/Supplementary Info: with Suction Jet Pump ; Number of pins: 5 -pin connector; Rated Voltage: 12 V; Supplementary Article/Info 2: with swirl pot ; Operating pressure from: 1.5 bar; Operating pressure to: 6.0 bar; |
| Stark : SKFU-0410319 | Fuel Feed Unit | Voltage: 12 V; Ø: 120 mm; Pressure [bar]: 3.5 bar; Number of connectors: 1 ; Injection System: Multi Point Injection (MPI) ; Current Strength to: 5.6 A; Total Length: 233 mm; |
| Stark : SKFU-0410320 | Fuel Feed Unit | Fitting Position: in fuel tank ; Height: 152 mm; Width: 130 mm; Voltage: 12 V; Ø: 129.5 mm; Pressure [bar]: 4.7 bar; Operating Mode: Electric ; Supplementary Article/Supplementary Info: with fuel sender unit ; Number of pins: 4 -pin connector; Flow rate: 155 l/h; Total Length: 168 mm; |
| Stark : SKFU-0410323 | Fuel Feed Unit | Pressure [bar]: 0.5 bar; Operating Mode: Electric ; Fuel Type: Diesel ; Supplementary Article/Supplementary Info: with fuel sender unit ; Number of connectors: 4 ; Flow rate: 60 l/h; Input Voltage: 12 V; |
| Stark : SKFU-0410332 | Fuel Feed Unit | Pressure [bar]: 4.5 bar; Flow rate: 140 l/h; |
| Stark : SKFU-0410334 | Fuel Feed Unit | Fitting Position: in fuel tank ; Ø: 137.5 mm; D1: 8 mm; D2: 8 mm; Operating Pressure: 3.8 bar; Operating Mode: Electric ; Fuel Type: Petrol ; Supplementary Article/Supplementary Info: with fuel sender unit ; Flow rate: 100 l/h; Injection System: Multi Point Injection (MPI) ; Total Length: 190 mm; |
| Stark : SKFU-0410335 | Fuel Feed Unit | Operating Pressure: 2.5 bar; Fuel Type: Diesel ; Vehicle Equipment: for vehicles without parking heater ; Flow rate: 150 l/h; |
| Stark : SKFU-0410338 | Fuel Feed Unit | Pressure [bar]: 3.5 bar; Fuel Type: Diesel ; |
| Stark : SKFU-0410343 | Fuel Feed Unit | Fitting Position: in fuel tank ; Pressure [bar]: 0.5 bar; Fuel Type: Diesel ; Supplementary Article/Supplementary Info: with fuel sender unit ; Number of pins: 5 -pin connector; Operating Voltage: 12 V; Flow rate: 45 l/h; |
| Stark : SKFU-0410345 | Fuel Feed Unit | Voltage: 12.5 V; Ø: 134 mm; Pressure [bar]: 4.5 bar; Operating Mode: Electric ; Pressure [psi]: 65.25 psi; Number of connectors: 2 ; Current Strength to: 12 A; Total Length: 190 mm; |
| Stark : SKFU-0410352 | Fuel Feed Unit | Height: 225 mm; D1: 120 mm; D2: 136 mm; Operating Pressure: 3.5 bar; Operating Mode: Electric ; Number of pins: 4 -pin connector; |
| Stark : SKFU-0410353 | Fuel Feed Unit | Fitting Position: in fuel tank ; Ø: 129.5 mm; Pressure [bar]: 4.5 bar; Operating Mode: Electric ; Supplementary Article/Supplementary Info: with fuel sender unit ; Flow rate: 165 l/h; Total Length: 168 mm; |
| Stark : SKFU-0410357 | Fuel Feed Unit | Fitting Position: in fuel tank ; Operating Pressure: 3.5 bar; Supplementary Article/Supplementary Info: with fuel sender unit ; Number of connectors: 4 ; Flow rate: 100 l/h; Injection System: Multi Point Injection (MPI) ; |
| Stark : SKFU-0410358 | Fuel Feed Unit | Fitting Position: in fuel tank ; Height: 123 mm; Width: 109 mm; Pressure [bar]: 4 bar; Operating Mode: Electric ; Fuel Type: Petrol ; Supplementary Article/Supplementary Info: with fuel sender unit ; Number of connectors: 5 ; Rated Voltage: 12 V; Flow rate: 135 l/h; Supplementary Article/Info 2: with pre-filter ; Observe mounting information: ; Total Length: 225 mm; |
| Stark : SKFU-0410359 | Fuel Feed Unit | Fitting Position: in fuel tank ; Pressure [bar]: 4 bar; Operating Mode: Electric ; Fuel Type: Petrol ; Supplementary Article/Supplementary Info: with fuel sender unit ; Observe mounting information: ; |
| Stark : SKFU-0410361 | Fuel Feed Unit | Voltage: 13 V; Ø: 135.2 mm; Pressure [bar]: 3.5 bar; Operating Mode: Electric ; Pressure [psi]: 50.75 psi; Current Strength to: 5.5 A; Total Length: 245 mm; |
| Stark : SKFU-0410363 | Fuel Feed Unit | Number of connectors: 2 ; Injection System: Multi Point Injection (MPI) ; |
| Stark : SKFU-0410373 | Fuel Feed Unit | Injection System: Multi Point Injection (MPI) ; |
| Stark : SKFU-0410374 | Fuel Feed Unit | Voltage: 12 V; Ø: 134 mm; Pressure [bar]: 4.5 bar; Operating Mode: Electric ; Supplementary Article/Supplementary Info: with fuel sender unit ; Number of pins: 4 -pin connector; Number of connectors: 2 ; Flow rate: 136 l/h; Current Strength to: 9.1 A; Total Length: 170 mm; |
| Stark : SKFU-0410391 | Fuel Feed Unit | Pressure [bar]: 3 bar; Operating Mode: Electric ; Supplementary Article/Supplementary Info: with fuel sender unit ; Number of connectors: 6 ; Flow rate: 90 l/h; Injection System: Multi Point Injection (MPI) ; |
| Stark : SKFU-0410393 | Fuel Feed Unit | Voltage: 12 V; Fuel Type: Petrol ; |
| Stark : SKFU-0410394 | Fuel Feed Unit | Ø: 129.5 mm; Pressure [bar]: 4.3 bar; Operating Mode: Electric ; Supplementary Article/Supplementary Info: with fuel sender unit ; Pressure [psi]: 62.35 psi; Total Length: 168 mm; |
| Stark : SKFU-0410406 | Fuel Feed Unit | Operating Pressure: 0.3 bar; Fuel Type: Diesel ; Flow rate: 90 l/h; |
| Stark : SKFU-0410415 | Fuel Feed Unit | Pressure [bar]: 4.7 bar; Fuel Type: Diesel ; Sensor Type: Lever Sensor ; Supplementary Article/Supplementary Info: with gasket/seal ; Operating Voltage: 13.5 V; |
| Stark : SKFU-0410416 | Fuel Feed Unit | Voltage: 12 V; Operating Mode: Electric ; Number of connectors: 1 ; |
| Stark : SKFU-0410420 | Fuel Feed Unit | Operating Mode: Electric ; Supplementary Article/Supplementary Info: with gasket/seal ; Number of pins: 4 -pin connector; |
| Stark : SKFU-0410427 | Fuel Feed Unit | Pressure [bar]: 4 bar; Operating Mode: Electric ; Fuel Type: Petrol ; Supplementary Article/Supplementary Info: with gasket/seal ; Number of pins: 4 -pin connector; Number of connectors: 4 ; Flow rate: 125 l/h; Supplementary Article/Info 2: with filter ; Input Voltage: 12 V; Flow rate: 2.08 l/min; |
| Stark : SKFU-0410431 | Fuel Feed Unit | Fitting Position: in fuel tank ; Operating Mode: Electric ; |
| Stark : SKFU-0410437 | Fuel Feed Unit | Operating Pressure: 3 bar; Operating Mode: Electric ; Fuel Type: Petrol ; Supplementary Article/Supplementary Info: with fuel sender unit ; Flow rate: 95 l/h; Injection System: Multi Point Injection (MPI) ; Input Voltage: 12 V; |
| Stark : SKFU-0410443 | Fuel Feed Unit | Fitting Position: in fuel tank ; Operating Mode: Electric ; Vehicle Equipment: for vehicles with parking heater ; |
| Stark : SKFU-0410451 | Fuel Feed Unit | Height: 136 mm; Width: 210 mm; Length: 120 mm; Pressure [bar]: 4 bar; Operating Mode: Electric ; Fuel Type: Petrol ; Supplementary Article/Supplementary Info: with fuel sender unit ; Number of connectors: 5 ; Operating Voltage: 12 V; Flow rate: 80 l/h; Supplementary Article/Info 2: with seal ring ; |
| Stark : SKFU-0410454 | Fuel Feed Unit | Voltage: 12 V; Operating Pressure: 3.5 bar; Operating Mode: Electric ; Fuel Type: Petrol ; Number of connectors: 4 ; Flow rate: 125 l/h; Injection System: Multi Point Injection (MPI) ; |
| Stark : SKFU-0410461 | Fuel Feed Unit | Fitting Position: Right ; Pressure [bar]: 4.5 bar; Fuel Type: Diesel ; Number of pins: 4 -pin connector; Operating Voltage: 12 V; |
| Stark : SKFU-0410470 | Fuel Feed Unit | Fitting Position: in fuel tank ; Operating Mode: Electric ; Supplementary Article/Supplementary Info: with fuel sender unit ; Number of pins: 4 -pin connector; |
| Stark : SKFU-0410472 | Fuel Feed Unit | Operating Pressure: 3 bar; Operating Mode: Electric ; Injection System: Multi Point Injection (MPI) ; |
| Stark : SKFU-0410480 | Fuel Feed Unit | |
| Stark : SKFU-0410485 | Fuel Feed Unit | Voltage: 12 V; Ø: 134 mm; Pressure [bar]: 3.5 bar; Operating Mode: Electric ; Supplementary Article/Supplementary Info: with fuel sender unit ; Pressure [psi]: 50.75 psi; Number of connectors: 2 ; Total Length: 425 mm; |
| Stark : SKFU-0410493 | Fuel Feed Unit | Operating Pressure: 3.5 bar; Flow rate: 60 l/h; |
| Stark : SKFU-0410502 | Fuel Feed Unit | |
| Stark : SKFF-0870480 | Fuel Feed Unit | Fitting Position: Left ; Voltage: 12 V; Operating Mode: Electric ; Housing Type: Synthetic Material Housing ; Supplementary Article/Info 2: with flange ; |
| Stark : SKFU-0410106 | Fuel Feed Unit | Injection System: Multi Point Injection (MPI) ; |
| Stark : SKFU-0410217 | Fuel Feed Unit | |
| Stark : SKFU-0410246 | Fuel Feed Unit | Fuel Type: Diesel ; from: 1.4 bar; |
| Stark : SKFU-0410324 | Fuel Feed Unit | Operating Pressure: 4.4 bar; |
| Stark : SKFU-0410347 | Fuel Feed Unit | Fitting Position: in fuel tank ; Operating Mode: Electric ; |
| Stark : SKFU-0410381 | Fuel Feed Unit | Voltage: 12 V; Operating Mode: Electric ; |
| Stark : SKFU-0410389 | Fuel Feed Unit | Supplementary Article/Supplementary Info: without tank sender unit ; Number of pins: 8 -pin connector; |
| Stark : SKFU-0410458 | Fuel Feed Unit | Fitting Position: in fuel tank ; Operating Mode: Electric ; |
| Stark : SKFU-0410489 | Fuel Feed Unit | Operating Pressure: 3.5 bar; Operating Mode: Electric ; Flow rate: 55 l/h; Injection System: Multi Point Injection (MPI) ; |
共
251
条记录，分3
页显示
