MOOG : K7147 |
Ball Joint |
- Adjustable: No ;
- Cotter Pin Hole: No ;
- Material: Neoprene ;
- Maximum Outside Diameter: 1.750 in ;
- Mounting Hardware Included: No ;
- Mounting Type: Press-in ;
- Suspension Grade Type: Standard ;
|
ACDELCO : 45D0106 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: No ;
- Dust Boot Included: Yes ;
- Greaseable: No ;
- Material: Steel ;
- Mounting Type: Press-in ;
- Stud Type: Tapered, Threaded ;
- Type: Upper ;
|
MOOG : K7346 |
Ball Joint |
- Adjustable: No ;
- Cotter Pin Hole: Yes ;
- Material: Neoprene ;
- Maximum Outside Diameter: 1.750 in ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Suspension Grade Type: Standard ;
|
ACDELCO : 45D2294 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: Yes ;
- Dust Boot Included: Yes ;
- Greaseable: Yes ;
- Material: Steel ;
- Mounting Type: Press In ;
- Stud Type: Threaded ;
- Type: Press In ;
|
ACDELCO : 45K15006 |
Ball Joint |
- Adjustable: Yes ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: Yes ;
- Dust Boot Included: Yes ;
- Greaseable: No ;
- Material: Steel ;
- Mounting Type: Press In ;
- Stud Type: Threaded ;
- Type: Caster Camber ;
|
ACDELCO : 45D2279 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: No ;
- Cotter Pin Hole: No ;
- Dust Boot Included: Yes ;
- Greaseable: Yes ;
- Height (IN): 3.3 ;
- Length (IN): 5.3 ;
- Material: Steel ;
- Mounting Type: Press In ;
- Stud Type: Grooved ;
- Type: Press In ;
- Weight (lb): 1 ;
- Width (IN): 4 ;
|
MOOG : K7399 |
Ball Joint |
- Adjustable: No ;
- Cotter Pin Hole: Yes ;
- Material: Neoprene ;
- Maximum Outside Diameter: 2.320 in ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Suspension Grade Type: Standard ;
|
MOOG : K7411 |
Ball Joint |
- Adjustable: No ;
- Cotter Pin Hole: Yes ;
- Material: Neoprene ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Suspension Grade Type: Standard ;
|
ACDELCO : 45D2318 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: Yes ;
- Dust Boot Included: Yes ;
- Greaseable: Yes ;
- Material: Steel ;
- Mounting Type: Press In ;
- Stud Type: Threaded ;
- Type: Press In ;
|
ACDELCO : 45D2311 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: No ;
- Dust Boot Included: Yes ;
- Greaseable: Yes ;
- Height (IN): 3.6 ;
- Length (IN): 4.2 ;
- Material: Steel ;
- Mounting Type: Press In ;
- Stud Type: Threaded ;
- Type: Press In ;
- Weight (lb): 1.8 ;
- Width (IN): 4 ;
|
ACDELCO : 45D0117 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: No ;
- Dust Boot Included: Yes ;
- Greaseable: Yes ;
- Height (IN): 3.6 ;
- Length (IN): 4.2 ;
- Material: Steel ;
- Mounting Type: Press In ;
- Stud Type: Threaded ;
- Type: Press In ;
- Weight (lb): 1 ;
- Width (IN): 4 ;
|
MOOG : K7451 |
Ball Joint |
- Adjustable: Yes ;
- Cotter Pin Hole: No ;
- Mounting Hardware Included: No ;
- Part Description: Suspension Ball Joint ;
|
MOOG : K7448 |
Ball Joint |
- Adjustable: Yes ;
- Mounting Hardware Included: Yes ;
|
ACDELCO : 45D2317 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: No ;
- Cotter Pin Hole: No ;
- Dust Boot Included: Yes ;
- Greaseable: No ;
- Material: Steel ;
- Mounting Type: Press In ;
- Stud Type: Grooved ;
- Type: Press In ;
|
MOOG : K7455 |
Ball Joint |
- Adjustable: No ;
- Cotter Pin Hole: Yes ;
- Material: Neoprene ;
- Maximum Outside Diameter: 2.350 in ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Suspension Grade Type: Standard ;
|
MOOG : K7449 |
Ball Joint |
- Adjustable: No ;
- Cotter Pin Hole: No ;
- Material: Neoprene ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Suspension Grade Type: Standard ;
|
MOOG : K7467 |
Ball Joint |
- Adjustable: No ;
- Cotter Pin Hole: Yes ;
- Material: Neoprene ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Suspension Grade Type: Standard ;
|
ACDELCO : 45D2316 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: No ;
- Dust Boot Included: Yes ;
- Greaseable: No ;
- Material: Steel ;
- Mounting Type: Press In ;
- Stud Type: Threaded ;
- Type: Press In ;
|
MOOG : K7465 |
Ball Joint |
- Adjustable: No ;
- Cotter Pin Hole: Yes ;
- Material: Neoprene ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Suspension Grade Type: Standard ;
|
MOOG : K7469 |
Ball Joint |
- Adjustable: Yes ;
- Mounting Hardware Included: Yes ;
|
MEVOTECH : MK7411 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bearing Type: Sintered Metal ;
- Castle Nut Included: Yes ;
- Cotter Pin Included: Yes ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Pre-Greased: Yes ;
- Stud Type: Threaded ;
|
MEVOTECH : MK7465 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bearing Type: Sintered Metal ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Pre-Greased: Yes ;
- Stud Type: Threaded ;
|
MEVOTECH : MK7399 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bearing Type: Sintered Metal ;
- Castle Nut Included: Yes ;
- Cotter Pin Included: Yes ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Pre-Greased: Yes ;
- Stud Type: Threaded ;
|
MEVOTECH : MK7451 |
Ball Joint |
- Adjustable: Yes ;
- Ball Joint Assembly: Yes ;
- Dust Boot Included: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
|
MEVOTECH : MK7455 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bearing Type: Sintered Metal ;
- Castle Nut Included: Yes ;
- Cotter Pin Included: Yes ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Pre-Greased: Yes ;
- Stud Type: Threaded ;
|
MEVOTECH : MK7448 |
Ball Joint |
- Adjustable: Yes ;
- Ball Joint Assembly: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Pre-Greased: Yes ;
- Stud Type: Threaded ;
|
MEVOTECH : MK7346 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bearing Type: Sintered Metal ;
- Castle Nut Included: Yes ;
- Cotter Pin Included: Yes ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Pre-Greased: Yes ;
- Stud Type: Threaded ;
|
MEVOTECH : MK7449 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bearing Type: Sintered Metal ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Pre-Greased: Yes ;
- Stud Type: Grooved ;
|
MEVOTECH : MK7467 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bearing Type: Sintered Metal ;
- Castle Nut Included: Yes ;
- Cotter Pin Included: Yes ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Pre-Greased: Yes ;
- Stud Type: Threaded ;
|
MEVOTECH : MK7147 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Pre-Greased: Yes ;
- Stud Type: Grooved ;
|
MOOG : K80629 |
Ball Joint |
- Adjustable: No ;
- Cotter Pin Hole: Yes ;
- Material: Neoprene ;
- Maximum Outside Diameter: 2.360 in ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Suspension Grade Type: Standard ;
|
MOOG : K80765 |
Ball Joint |
- Adjustable: No ;
- Cotter Pin Hole: Yes ;
- Material: Neoprene ;
- Maximum Outside Diameter: 2.360 in ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Suspension Grade Type: Standard ;
|
MOOG : K80628 |
Ball Joint |
- Adjustable: No ;
- Cotter Pin Hole: Yes ;
- Material: Neoprene ;
- Maximum Outside Diameter: 2.160 in ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Suspension Grade Type: Standard ;
|
MOOG : K80605 |
Ball Joint |
- Adjustable: No ;
- Cotter Pin Hole: Yes ;
- Material: Neoprene ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Suspension Grade Type: Standard ;
|
MOOG : K7460 |
Ball Joint |
- Adjustable: No ;
- Cotter Pin Hole: Yes ;
- Material: Neoprene ;
- Maximum Outside Diameter: 2.200 in ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Suspension Grade Type: Standard ;
|
MEVOTECH : MK80605 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bearing Type: Sintered Metal ;
- Castle Nut Included: Yes ;
- Cotter Pin Included: Yes ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Pre-Greased: Yes ;
- Stud Type: Threaded ;
|
MEVOTECH : MK80765 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bearing Type: Sintered Metal ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Pre-Greased: Yes ;
- Stud Type: Threaded ;
|
ACDELCO : 45K5008 |
Ball Joint |
- Adjustable: Yes ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: No ;
- Dust Boot Included: Yes ;
- Greaseable: Yes ;
- Material: Steel ;
- Mounting Type: Press In ;
- Stud Type: Threaded ;
- Type: Caster Camber ;
|
MOOG : K500063 |
Ball Joint |
- Adjustable: No ;
- Cotter Pin Hole: No ;
- Material: Neoprene ;
- Mounting Hardware Included: No ;
- Mounting Type: Press-in ;
- Suspension Grade Type: Standard ;
|
MOOG : K80996 |
Ball Joint |
- Adjustable: No ;
- Cotter Pin Hole: Yes ;
- Material: Neoprene ;
- Maximum Outside Diameter: 2.240 in ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Suspension Grade Type: Standard ;
|
MOOG : K500082 |
Ball Joint |
- Adjustable: No ;
- Cotter Pin Hole: Yes ;
- Material: Neoprene ;
- Maximum Outside Diameter: 2.280 in ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Suspension Grade Type: Standard ;
|
ACDELCO : 45D0134 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: No ;
- Dust Boot Included: Yes ;
- Greaseable: Yes ;
- Height (IN): 3.6 ;
- Length (IN): 4.2 ;
- Material: Steel ;
- Mounting Type: Press In ;
- Stud Type: Threaded ;
- Type: Press In ;
- Weight (lb): 1.25 ;
- Width (IN): 4 ;
|
ACDELCO : 45D2378 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: No ;
- Dust Boot Included: Yes ;
- Greaseable: Yes ;
- Material: Steel ;
- Mounting Type: Press In ;
- Stud Type: Threaded ;
- Type: Press In ;
|
ACDELCO : 45D2380 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: No ;
- Dust Boot Included: Yes ;
- Greaseable: Yes ;
- Material: Steel ;
- Mounting Type: Press In ;
- Stud Type: Threaded ;
- Type: Press In ;
|
ACDELCO : 45D2379 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: No ;
- Dust Boot Included: Yes ;
- Greaseable: Yes ;
- Material: Steel ;
- Mounting Type: Press In ;
- Stud Type: Threaded ;
- Type: Press In ;
|
MEVOTECH : MK80629 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bearing Type: Sintered Metal ;
- Castle Nut Included: Yes ;
- Cotter Pin Included: Yes ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Pre-Greased: Yes ;
- Stud Type: Threaded ;
|
MCQUAY-NORRIS : FA2178 |
Ball Joint |
|
MEVOTECH : MS25503 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bearing Type: Sintered Metal ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Pre-Greased: Yes ;
- Stud Type: Threaded ;
|
MOOG : K500113 |
Ball Joint |
- Adjustable: No ;
- Cotter Pin Hole: Yes ;
- Material: Neoprene ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Suspension Grade Type: Standard ;
|
DELPHI : TC888 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bushings Included: No ;
- Castle Nut Included: No ;
- Color: Gray ;
- Cotter Pin Hole: Yes ;
- Cotter Pin Included: No ;
- Dust Boot: Yes ;
- Dust Boot Material: Choloroprene Rubber (CR) ;
- Greasable: No ;
- Grease Fitting Included: No ;
- Height (IN): 4.146 ;
- Height (MM): 105.3 ;
- Material: Steel ;
- Maximum Outside Diameter (IN): 2.354 ;
- Maximum Outside Diameter (MM): 59.8 ;
- Mount Plate Included: No ;
- Mounting Bolts Included: No ;
- Mounting Hardware Included: Yes ;
- Nuts Included: Yes ;
- Position(s): Front Lower ;
- Stud Tapered End 1 Diameter (in): 0.925 ;
- Stud Tapered End 1 Diameter (mm): 23.5 ;
- Stud Tapered End 2 Diameter (in): 1.051 ;
- Stud Tapered End 2 Diameter (mm): 26.7 ;
- Stud Thread Diameter (IN): 0.787 ;
- Stud Thread Diameter (MM): 20.0 ;
- Stud Thread Length (IN): 1.024 ;
- Stud Thread Length (MM): 26.0 ;
- Stud Thread Pitch (mm): 1.5 ;
- Stud Type: Threaded ;
- Suspension Grade Type: Standard ;
- Tapered Stud: Yes ;
- Washers Included: No ;
- Width (MM): 59.8 ;
- Wrench Size (IN): 1.181 ;
- Wrench Size (mm): 30.0 ;
|
BECK/ARNLEY : 1016811 |
Ball Joint |
|
MOOG : K100057 |
Ball Joint |
- Adjustable: No ;
- Mounting Hardware Included: Yes ;
|
LEMFORDER : 1887503 |
Ball Joint |
- Cone Size [mm]: 26 ;
- Diameter 1/ Diameter 2 [mm]: 45,2 / 62 ;
|
ACDELCO : 45D2411 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: No ;
- Dust Boot Included: Yes ;
- Greaseable: Yes ;
- Height (IN): 3.6 ;
- Length (IN): 4.2 ;
- Material: Steel ;
- Mounting Type: Press In ;
- Stud Type: Threaded ;
- Type: Press In ;
- Weight (lb): 1.5 ;
- Width (IN): 4 ;
|
ACDELCO : 45D2401 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: No ;
- Cotter Pin Hole: No ;
- Dust Boot Included: Yes ;
- Greaseable: No ;
- Material: Steel ;
- Mounting Type: Press In ;
- Stud Type: Grooved ;
- Type: Press In ;
|
MEVOTECH : MK80630 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bearing Type: Sintered Metal ;
- Castle Nut Included: Yes ;
- Cotter Pin Included: Yes ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Pre-Greased: Yes ;
- Stud Type: Threaded ;
|
ACDELCO : 45K16011 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bushings Included: No ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: No ;
- Cotter Pin Included: Yes ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Height (IN): 2.70 ;
- Height (MM): 68.58 ;
- Length (IN): 4.00 ;
- Length (MM): 101.6 ;
- Material: Steel ;
- Mounting Hardware Included: Yes ;
- Stud Type: Threaded ;
- Width (IN): 3.2 ;
- Width (MM): 81.3 ;
|
ACDELCO : 45D2425 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: Yes ;
- Dust Boot Included: Yes ;
- Greaseable: Yes ;
- Height (IN): 3.59 ;
- Length (IN): 5.44 ;
- Material: Steel ;
- Mounting Type: Press In ;
- Stud Type: Threaded ;
- Type: Press In ;
- Weight (lb): 1.5 ;
- Width (IN): 4.88 ;
|
MEVOTECH : MS25506 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bearing Type: Sintered Metal ;
- Castle Nut Included: Yes ;
- Cotter Pin Included: Yes ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Pre-Greased: Yes ;
- Stud Type: Threaded ;
|
MEVOTECH : MK7469 |
Ball Joint |
- Adjustable: Yes ;
- Ball Joint Assembly: Yes ;
- Bearing Type: Sintered Metal ;
- Castle Nut Included: No ;
- Cotter Pin Included: No ;
- Dust Boot Included: Yes ;
- Dust Boot Material: Neoprene ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Nuts Included: Yes ;
- Pre-Greased: Yes ;
- Stud Type: Threaded ;
- Wrench Size: 22.0 MM ;
|
MOOG : K500120 |
Ball Joint |
- Adjustable: No ;
- Cotter Pin Hole: No ;
- Material: Neoprene ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Suspension Grade Type: Standard ;
|
MEVOTECH : MS25505 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bearing Type: Sintered Metal ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Pre-Greased: Yes ;
- Stud Type: Threaded ;
|
MOOG : K500138 |
Ball Joint |
- Adjustable: No ;
- Cotter Pin Hole: Yes ;
- Material: Neoprene ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Thread-In ;
|
MOOG : K100107 |
Ball Joint |
- Adjustable: Yes ;
- Mounting Hardware Included: Yes ;
|
ACDELCO : 45D2442 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: No ;
- Dust Boot Included: Yes ;
- Greaseable: Yes ;
- Height (IN): 3 ;
- Length (IN): 14.2 ;
- Material: Steel ;
- Mounting Type: Press In ;
- Stud Type: Threaded ;
- Type: Press In ;
- Weight (lb): 1.5 ;
- Width (IN): 4 ;
|
LEMFORDER : 3369701 |
Ball Joint |
|
MEVOTECH : MK80628 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bearing Type: Sintered Metal ;
- Castle Nut Included: Yes ;
- Cotter Pin Included: Yes ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Pre-Greased: Yes ;
- Stud Type: Threaded ;
|
MOOG : K500176 |
Ball Joint |
- Adjustable: No ;
- Cotter Pin Hole: No ;
- Material: Neoprene ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Suspension Grade Type: Standard ;
|
ULTRA-POWER : K7147 |
Ball Joint |
|
MOOG : K100115 |
Ball Joint |
- Adjustable: Yes ;
- Mounting Hardware Included: Yes ;
|
MEVOTECH : TXK80605 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bearing Type: Sintered Metal ;
- Castle Nut Included: Yes ;
- Cotter Pin Included: Yes ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Pre-Greased: Yes ;
- Stud Type: Threaded ;
|
MEVOTECH : TXK7467 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bearing Type: Sintered Metal ;
- Castle Nut Included: Yes ;
- Cotter Pin Included: Yes ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Pre-Greased: Yes ;
- Stud Type: Threaded ;
|
MEVOTECH : TXK7411 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bearing Type: Sintered Metal ;
- Castle Nut Included: Yes ;
- Cotter Pin Included: Yes ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: Yes ;
- Greaseable: Yes ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press-in ;
- Pre-Greased: Yes ;
- Stud Type: Threaded ;
|
DELPHI : TC2424 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Bushings Included: No ;
- Castle Nut Included: No ;
- Color: Gray ;
- Cotter Pin Hole: No ;
- Cotter Pin Included: No ;
- Dust Boot: Yes ;
- Dust Boot Material: Choloroprene Rubber (CR) ;
- Greasable: No ;
- Grease Fitting Included: No ;
- Height (IN): 4.173 ;
- Height (MM): 104.0 ;
- Material: Steel ;
- Maximum Outside Diameter (IN): 2.354 ;
- Maximum Outside Diameter (MM): 59.8 ;
- Mount Plate Included: No ;
- Mounting Bolts Included: No ;
- Mounting Hardware Included: Yes ;
- Mounting Type: Press In ;
- Nuts Included: Yes ;
- Position(s): Front Lower ;
- Stud Taper Per Foot (IN): 0.167 ;
- Stud Tapered End 1 Diameter (in): 1.059 ;
- Stud Tapered End 1 Diameter (mm): 26.9 ;
- Stud Tapered End 2 Diameter (in): 0.858 ;
- Stud Tapered End 2 Diameter (mm): 21.8 ;
- Stud Thread Diameter (MM): 20.0 ;
- Stud Thread Length (IN): 1.004 ;
- Stud Thread Pitch (mm): 1.5 ;
- Stud Type: Threaded ;
- Suspension Grade Type: Standard ;
- Tapered Stud: Yes ;
- Washers Included: Yes ;
- Width (MM): 59.8 ;
|
ULTRA-POWER : K7346 |
Ball Joint |
|
ULTRA-POWER : K7448 |
Ball Joint |
|
ULTRA-POWER : K80629 |
Ball Joint |
|
ULTRA-POWER : K7467 |
Ball Joint |
|
ULTRA-POWER : K7399 |
Ball Joint |
|
MEVOTECH : GK7147 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot Included: Yes ;
- Mounting Type: Press-in ;
|
MEVOTECH : GK7346 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot Included: Yes ;
- Mounting Type: Press-in ;
|
MEVOTECH : GK7399 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot Included: Yes ;
- Mounting Type: Press-in ;
|
MEVOTECH : GK7411 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot Included: Yes ;
- Mounting Type: Press-in ;
|
MEVOTECH : GK7448 |
Ball Joint |
- Adjustable: Yes ;
- Ball Joint Assembly: Yes ;
- Mounting Type: Press-in ;
|
MEVOTECH : GK7449 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot Included: Yes ;
- Mounting Type: Press-in ;
|
MEVOTECH : GK7451 |
Ball Joint |
- Adjustable: Yes ;
- Ball Joint Assembly: Yes ;
- Dust Boot Included: Yes ;
- Mounting Type: Press-in ;
|
MEVOTECH : GK7465 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot Included: Yes ;
- Mounting Type: Press-in ;
|
MEVOTECH : GK7467 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot Included: Yes ;
- Mounting Type: Press-in ;
|
MEVOTECH : GK7469 |
Ball Joint |
- Adjustable: Yes ;
- Ball Joint Assembly: Yes ;
- Dust Boot Included: Yes ;
- Dust Boot Material: Rubber ;
- Mounting Type: Press-in ;
- Pre-Greased: Yes ;
- Stud Type: Threaded ;
|
MEVOTECH : GK80605 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot Included: Yes ;
- Mounting Type: Press-in ;
|
MEVOTECH : GK80629 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot Included: Yes ;
- Mounting Type: Press-in ;
|
MEVOTECH : GK80765 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot Included: Yes ;
- Mounting Type: Press-in ;
|
MEVOTECH : GS25505 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Dust Boot Included: Yes ;
- Mounting Type: Press-in ;
|
MEVOTECH : GS25506 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Included: Yes ;
- Dust Boot Included: Yes ;
- Mounting Type: Press-in ;
- Pre-Greased: Yes ;
- Stud Type: Threaded ;
|
ULTRA-POWER : K80765 |
Ball Joint |
|
ULTRA-POWER : MS25503 |
Ball Joint |
|
ACDELCO : 45D1493 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: No ;
- Dust Boot Included: Yes ;
- Greaseable: Yes ;
- Height (IN): 3.2 ;
- Length (IN): 5.2 ;
- Material: Steel ;
- Mounting Type: Press In ;
- Stud Type: Threaded ;
- Type: Press In ;
- Weight (lb): 1 ;
- Width (IN): 4 ;
|
ACDELCO : 45D1500 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: No ;
- Dust Boot Included: Yes ;
- Greaseable: Yes ;
- Height (IN): 3.3 ;
- Length (IN): 5.3 ;
- Material: Steel ;
- Mounting Type: Press In ;
- Stud Type: Threaded ;
- Type: Press In ;
- Weight (lb): 1.7 ;
- Width (IN): 4 ;
|
ACDELCO : 45D1503 |
Ball Joint |
- Adjustable: No ;
- Ball Joint Assembly: Yes ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: No ;
- Dust Boot Included: Yes ;
- Greaseable: Yes ;
- Height (IN): 3.3 ;
- Length (IN): 5.3 ;
- Material: Steel ;
- Mounting Type: Press In ;
- Stud Type: Threaded ;
- Type: Press In ;
- Weight (lb): 2.45 ;
- Width (IN): 4 ;
|
ACDELCO : 45K4029 |
Ball Joint |
- Adjustable: Yes ;
- Ball Joint Assembly: Yes ;
- Bushings Included: No ;
- Castle Nut Included: Yes ;
- Cotter Pin Hole: No ;
- Cotter Pin Included: Yes ;
- Dust Boot Included: Yes ;
- Grease Fitting Included: No ;
- Greaseable: No ;
- Height (IN): 3.00 ;
- Height (MM): 76.2 ;
- Length (IN): 10.70 ;
- Length (MM): 271.8 ;
- Material: Steel ;
- Mounting Hardware Included: Yes ;
- Stud Type: Threaded ;
- Width (IN): 3.8 ;
- Width (MM): 96.5 ;
|