参考号 | 零件 | 参数 |
---|---|---|
PAYEN : KG065 | Shaft Seal, crankshaft | Fitting Position: Timing End ; |
PAYEN : NJ330 | Shaft Seal, crankshaft | Inner Diameter: 101.60 mm; Height: 13.00 mm; Outer diameter: 125.00 mm; : MVQ (silicone rubber) ; : Left-hand Twist ; Radial Shaft Seal Design: 827SS LD ; |
PAYEN : KS696 | Shaft Seal, crankshaft | Radial Shaft Seal Design: Rope seal ; |
PAYEN : KT632 | Shaft Seal, crankshaft | Fitting Position: Transmission End ; |
PAYEN : KT633 | Shaft Seal, crankshaft | Fitting Position: Transmission End ; |
PAYEN : KT636 | Shaft Seal, crankshaft | Radial Shaft Seal Design: Rope seal ; |
PAYEN : KT638 | Shaft Seal, crankshaft | Radial Shaft Seal Design: Rope seal ; |
PAYEN : KV412 | Shaft Seal, crankshaft | Fitting Position: Transmission End ; |
PAYEN : KV416 | Shaft Seal, crankshaft | Radial Shaft Seal Design: Rope seal ; |
PAYEN : KV417 | Shaft Seal, crankshaft | Fitting Position: Transmission End ; |
PAYEN : LB955 | Shaft Seal, crankshaft | Inner Diameter: 90.00 mm; Height: 8.00 mm; Outer diameter: 107.00 mm; Radial Shaft Seal Design: Rope seal ; |
PAYEN : LK5000 | Shaft Seal, crankshaft | Inner Diameter: 89.00 mm; Outer diameter: 116.00 mm; Height: 10.20 mm; : FPM (fluoride rubber) ; : Left-hand Twist ; Radial Shaft Seal Design: 840S LD SP ; : Integrated housing ; |
PAYEN : LK5001 | Shaft Seal, crankshaft | Inner Diameter: 74.00 mm; Height: 17.000 mm; Outer diameter: 187.50 mm; : FPM (fluoride rubber) ; : Left-hand Twist ; : Integrated housing ; |
PAYEN : LK5002 | Shaft Seal, crankshaft | Inner Diameter: 136.00 mm; Outer diameter: 153.00 mm; Height: 21.000 mm; Observe mounting information: ; : PTFE (polytetrafluoroethylene) ; : Left-hand Twist ; Radial Shaft Seal Design: 841S LD ; : Integrated housing ; |
PAYEN : LK5003 | Shaft Seal, crankshaft | Inner Diameter: 85.00 mm; Height: 15.700 mm; Outer diameter: 131.00 mm; : Integrated housing ; Observe mounting information: ; : PTFE (polytetrafluoroethylene) ; : Left-hand Twist ; Radial Shaft Seal Design: 841S SP ; |
PAYEN : LK5004 | Shaft Seal, crankshaft | Inner Diameter: 80.00 mm; Height: 19.400 mm; Outer diameter: 182.00 mm; : Left-hand Twist ; Radial Shaft Seal Design: 841N LS SP ; : Integrated housing ; Observe mounting information: ; : PTFE (polytetrafluoroethylene) ; |
PAYEN : LK5005 | Shaft Seal, crankshaft | Inner Diameter: 88.00 mm; Outer diameter: 188.00 mm; Height: 15.000 mm; : Left-hand Twist ; Radial Shaft Seal Design: 841 SP ; : Integrated housing ; Observe mounting information: ; : PTFE (polytetrafluoroethylene) ; |
PAYEN : LK5006 | Shaft Seal, crankshaft | Inner Diameter: 85.00 mm; Outer diameter: 131.00 mm; Height: 16.000 mm; : PTFE (polytetrafluoroethylene) ; Radial Shaft Seal Design: 841S ; : Integrated housing ; Observe mounting information: ; |
PAYEN : LK5007 | Shaft Seal, crankshaft | Inner Diameter: 90.00 mm; Height: 24.00 mm; Outer diameter: 173.00 mm; Observe mounting information: ; : PTFE (polytetrafluoroethylene) ; : Left-hand Twist ; Radial Shaft Seal Design: 841S ; : Integrated housing ; |
PAYEN : LK5008 | Shaft Seal, crankshaft | Inner Diameter: 85.00 mm; Height: 15.700 mm; Outer diameter: 131.00 mm; Radial Shaft Seal Design: 841S SP ; : Integrated housing ; Observe mounting information: ; : PTFE (polytetrafluoroethylene) ; : Left-hand Twist ; |
PAYEN : LK5009 | Shaft Seal, crankshaft | Inner Diameter: 99.00 mm; Outer diameter: 118.00 mm; Height: 16.50 mm; : Left-hand Twist ; Radial Shaft Seal Design: 841S LD ; : Integrated housing ; Observe mounting information: ; : PTFE (polytetrafluoroethylene) ; |
PAYEN : LK5011 | Shaft Seal, crankshaft | Inner Diameter: 85.00 mm; Outer diameter 1: 152.0 mm; Outer diameter: 131.00 mm; Height: 15.94 mm; : Integrated housing ; Observe mounting information: ; : PTFE (polytetrafluoroethylene) ; |
PAYEN : LK5012 | Shaft Seal, crankshaft | Inner Diameter: 85.00 mm; Outer diameter 1: 153.00 mm; Outer diameter: 132.00 mm; Height: 15.70 mm; : PTFE (polytetrafluoroethylene) ; Observe mounting information: ; : Left-hand Twist ; Radial Shaft Seal Design: 841S LD ; : Integrated housing ; |
PAYEN : LK5013 | Shaft Seal, crankshaft | Outer diameter 1: 163.0 mm; Inner Diameter: 85.00 mm; Height: 15.50 mm; Outer diameter: 111.00 mm; Radial Shaft Seal Design: 841 LD ; : Integrated housing ; : PTFE (polytetrafluoroethylene) ; Observe mounting information: ; : Left-hand Twist ; |
PAYEN : LV501 | Shaft Seal, crankshaft | Radial Shaft Seal Design: Rope seal ; |
PAYEN : NA298 | Shaft Seal, crankshaft | Inner Diameter: 44.5 mm; Outer diameter: 50.7 mm; Height: 14.3 mm; : NBR (nitrile butadiene rubber) ; Radial Shaft Seal Design: 822S RD ; : Clockwise rotation ; |
PAYEN : NA378 | Shaft Seal, crankshaft | Inner Diameter: 50 mm; Outer diameter: 72 mm; Height: 12 mm; Radial Shaft Seal Design: 827S DD ; : Clockwise rotation ; Specification: Inner ; : NBR (nitrile butadiene rubber) ; |
PAYEN : NA422 | Shaft Seal, crankshaft | Inner Diameter: 50.80 mm; Outer diameter: 69.90 mm; Height: 12.70 mm; : NBR (nitrile butadiene rubber) ; : Alternating Twist ; Radial Shaft Seal Design: 827S DD ; |
PAYEN : NA473 | Shaft Seal, crankshaft | Inner Diameter: 39.70 mm; Outer diameter: 59.00 mm; Height: 9.50 mm; : Right-hand Twist ; Radial Shaft Seal Design: 827S RD ; : NBR (nitrile butadiene rubber) ; |
PAYEN : NA5013 | Shaft Seal, crankshaft | Inner Diameter: 30.00 mm; Outer diameter: 50.00 mm; Height: 7.50 mm; : Right-hand Twist ; Radial Shaft Seal Design: 829S LD ; Observe mounting information: ; : PTFE (polytetrafluoroethylene) ; |
PAYEN : NA5017 | Shaft Seal, crankshaft | Inner Diameter: 98.00 mm; Outer diameter: 110.00 mm; Height: 8.50 mm; : FPM (fluoride rubber) ; : Left-hand Twist ; Radial Shaft Seal Design: 827S LD ; |
PAYEN : NA5018 | Shaft Seal, crankshaft | Inner Diameter: 35.00 mm; Outer diameter: 47.00 mm; Height: 5.60 mm; : Right-hand Twist ; Radial Shaft Seal Design: 827S RD ; : FPM (fluoride rubber) ; |
PAYEN : NA5023 | Shaft Seal, crankshaft | Inner Diameter: 50.00 mm; Outer diameter: 65.00 mm; Height: 8.00 mm; Height 1: 9.30 mm; : FPM (fluoride rubber) ; : Right-hand Twist ; Radial Shaft Seal Design: 829S RD W ; |
PAYEN : NA5030 | Shaft Seal, crankshaft | Inner Diameter: 106.00 mm; Outer diameter 1: 196.00 mm; Outer diameter: 190.00 mm; Height: 15.20 mm; Observe mounting information: ; : Left-hand Twist ; Radial Shaft Seal Design: 841S LD ; : Integrated housing ; : PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ; |
PAYEN : NA5031 | Shaft Seal, crankshaft | Inner Diameter: 50.00 mm; Height: 13.70 mm; Outer diameter: 86.50 mm; Radial Shaft Seal Design: 827S W ; Observe mounting information: ; : PTFE (polytetrafluoroethylene) ; : Right-hand Twist ; |
PAYEN : NA5036 | Shaft Seal, crankshaft | Inner Diameter: 42.00 mm; Height: 6.00 mm; Outer diameter: 54.00 mm; Radial Shaft Seal Design: 827S RD W ; : FPM (fluoride rubber) ; : Right-hand Twist ; |
PAYEN : NA5037 | Shaft Seal, crankshaft | Inner Diameter: 85.00 mm; Height: 11.00 mm; Outer diameter: 105.00 mm; Radial Shaft Seal Design: 827S LDW ; : ACM (Polyacrylate) ; : Left-hand Twist ; |
PAYEN : NA5040 | Shaft Seal, crankshaft | Inner Diameter: 110.00 mm; Height: 13.00 mm; Outer diameter: 135.00 mm; : FPM (fluoride rubber) ; : Left-hand Twist ; Radial Shaft Seal Design: 823S LD ; |
PAYEN : NA5044 | Shaft Seal, crankshaft | Inner Diameter: 125 mm; Height: 15 mm; Outer diameter: 150 mm; : FPM (fluoride rubber) ; Radial Shaft Seal Design: 829SLDW ; : Anti-clockwise rotation ; |
PAYEN : NA5045 | Shaft Seal, crankshaft | Inner Diameter: 53.00 mm; Height: 10.00 mm; Outer diameter: 68.00 mm; : ACM (Polyacrylate) ; : Left-hand Twist ; Radial Shaft Seal Design: 827N LD ; |
PAYEN : NA5049 | Shaft Seal, crankshaft | Inner Diameter: 64.00 mm; Height: 8.00 mm; Outer diameter: 80.00 mm; : ACM (Polyacrylate) ; : Left-hand Twist ; Radial Shaft Seal Design: 822S LD ; |
PAYEN : NA5050 | Shaft Seal, crankshaft | Inner Diameter: 70 mm; Outer diameter: 90 mm; Height: 10 mm; : ACM (Polyacrylate) ; Radial Shaft Seal Design: 827S ; : Anti-clockwise rotation ; |
PAYEN : NA5051 | Shaft Seal, crankshaft | Inner Diameter: 40.00 mm; Outer diameter: 56.00 mm; Height: 7.00 mm; : FPM (fluoride rubber) ; : Right-hand Twist ; Radial Shaft Seal Design: 827 N ; |
PAYEN : NA5052 | Shaft Seal, crankshaft | Inner Diameter: 70.00 mm; Outer diameter: 85.00 mm; Height: 8.00 mm; : Left-hand Twist ; Radial Shaft Seal Design: 822N LD ; : FPM (fluoride rubber) ; |
PAYEN : NA5055 | Shaft Seal, crankshaft | Inner Diameter: 70 mm; Outer diameter: 90 mm; Height: 10 mm; Radial Shaft Seal Design: 829S RD W ; : Clockwise rotation ; : FPM (fluoride rubber) ; |
PAYEN : NA5057 | Shaft Seal, crankshaft | Inner Diameter: 27.00 mm; Outer diameter: 37.00 mm; Height: 7.00 mm; : Right-hand Twist ; Radial Shaft Seal Design: 829S RD W ; : FPM (fluoride rubber) ; |
PAYEN : NA5061 | Shaft Seal, crankshaft | Inner Diameter: 74.00 mm; Outer diameter: 88.00 mm; Height: 8.00 mm; : Left-hand Twist ; Radial Shaft Seal Design: 829S LD W ; : FPM (fluoride rubber) ; |
PAYEN : NA5062 | Shaft Seal, crankshaft | Inner Diameter: 74.00 mm; Outer diameter: 90.00 mm; Height: 10.00 mm; Radial Shaft Seal Design: 829S LD W ; : Anticlockwise rotation ; : ACM (Polyacrylate) ; |
PAYEN : NA5065 | Shaft Seal, crankshaft | Inner Diameter: 62.00 mm; Height: 12.00 mm; Outer diameter: 80.00 mm; : Left-hand Twist ; Radial Shaft Seal Design: 822N LD ; : ACM (Polyacrylate) ; |
PAYEN : NA5066 | Shaft Seal, crankshaft | Inner Diameter: 35.00 mm; Height: 10.00 mm; Outer diameter: 50.00 mm; : Right-hand Twist ; Radial Shaft Seal Design: 827S RD W ; : ACM (Polyacrylate) ; |
PAYEN : NA5070 | Shaft Seal, crankshaft | Inner Diameter: 31.00 mm; Height: 7.00 mm; Outer diameter: 41.00 mm; : Right-hand Twist ; Radial Shaft Seal Design: 829S RD W ; : FPM (fluoride rubber) ; |
PAYEN : NA5074 | Shaft Seal, crankshaft | Inner Diameter: 93.00 mm; Height: 15.50 mm; Outer diameter: 133.50 mm; Radial Shaft Seal Design: 841S LD SP ; : Integrated housing ; Observe mounting information: ; : PTFE (polytetrafluoroethylene) ; : Left-hand Twist ; |
PAYEN : NA5083 | Shaft Seal, crankshaft | Inner Diameter: 32.50 mm; Outer diameter: 45.00 mm; Height: 7.70 mm; : Right-hand Twist ; Radial Shaft Seal Design: 827S RD ; : FPM (fluoride rubber) ; |
PAYEN : NA5088 | Shaft Seal, crankshaft | Inner Diameter: 75.00 mm; Height: 8.00 mm; Outer diameter: 107.00 mm; : Left-hand Twist ; Radial Shaft Seal Design: ASW ; : FPM (fluoride rubber) ; |
PAYEN : NA5089 | Shaft Seal, crankshaft | Inner Diameter: 38.00 mm; Height: 8.00 mm; Outer diameter: 50.00 mm; Radial Shaft Seal Design: 827S RD ; : Clockwise rotation ; : NBR (nitrile butadiene rubber) ; |
PAYEN : NA5090 | Shaft Seal, crankshaft | Inner Diameter: 76.00 mm; Height: 8.50 mm; Outer diameter: 94.00 mm; : Left-hand Twist ; Radial Shaft Seal Design: 827S LD ; : FPM (fluoride rubber) ; |
PAYEN : NA5099 | Shaft Seal, crankshaft | Inner Diameter: 44.00 mm; Height: 10.00 mm; Outer diameter: 60.00 mm; Radial Shaft Seal Design: 829S RD W ; Observe mounting information: ; : PTFE (polytetrafluoroethylene) ; : Right-hand Twist ; |
PAYEN : NA5101 | Shaft Seal, crankshaft | Inner Diameter: 66.7 mm; Height: 9.5 mm; Outer diameter: 88.9 mm; Radial Shaft Seal Design: 827N W ; : Clockwise rotation ; : MVQ (Silicone Elastomer) ; |
PAYEN : NA5103 | Shaft Seal, crankshaft | Inner Diameter: 55.00 mm; Height: 8.00 mm; Outer diameter: 68.00 mm; Radial Shaft Seal Design: 829S RD W ; Observe mounting information: ; : PTFE (polytetrafluoroethylene) ; : Right-hand Twist ; |
PAYEN : NA5104 | Shaft Seal, crankshaft | Inner Diameter: 90.00 mm; Height: 12.00 mm; Outer diameter: 110.00 mm; : Left-hand Twist ; Radial Shaft Seal Design: 829S LD W ; Observe mounting information: ; : PTFE (polytetrafluoroethylene) ; |
PAYEN : NA5105 | Shaft Seal, crankshaft | Inner Diameter: 48.00 mm; Outer diameter: 65.00 mm; Height: 10.00 mm; : Right-hand Twist ; Radial Shaft Seal Design: 829S RD W ; Observe mounting information: ; : PTFE (polytetrafluoroethylene) ; |
PAYEN : NA5107 | Shaft Seal, crankshaft | Inner Diameter: 90.00 mm; Outer diameter: 167.00 mm; Height: 10.50 mm; : Left-hand Twist ; Radial Shaft Seal Design: 841S LD SP ; : Integrated housing ; Observe mounting information: ; : PTFE (polytetrafluoroethylene) ; |
PAYEN : NA5108 | Shaft Seal, crankshaft | Inner Diameter: 42.00 mm; Outer diameter: 55.00 mm; Height: 7.00 mm; : FPM (fluoride rubber)/ACM (polyacrylate rubber) ; : Right-hand Twist ; Radial Shaft Seal Design: 827S RD W ; |
PAYEN : NA5109 | Shaft Seal, crankshaft | Inner Diameter: 40.00 mm; Outer diameter: 62.00 mm; Height: 8.00 mm; : Right-hand Twist ; Radial Shaft Seal Design: 827S RD W ; Observe mounting information: ; : PTFE (polytetrafluoroethylene) ; |
PAYEN : NA5118 | Shaft Seal, crankshaft | Inner Diameter: 80.00 mm; Outer diameter: 100.00 mm; Height: 9.00 mm; : PTFE (polytetrafluoroethylene) ; : Alternating Twist ; Radial Shaft Seal Design: 827S DD W ; Observe mounting information: ; |
PAYEN : NA5120 | Shaft Seal, crankshaft | Inner Diameter: 78.00 mm; Height: 11.00 mm; Outer diameter: 104.00 mm; : ACM (Polyacrylate) ; : Alternating Twist ; Radial Shaft Seal Design: 829S DD W ; |
PAYEN : NA5121 | Shaft Seal, crankshaft | Inner Diameter: 115.00 mm; Outer diameter: 140.00 mm; Height: 13.00 mm; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; : Left-hand Twist ; Radial Shaft Seal Design: 829S LD W ; Observe mounting information: ; |
PAYEN : NA5130 | Shaft Seal, crankshaft | Inner Diameter: 79.00 mm; Height: 21.50 mm; Outer diameter: 196.00 mm; Observe mounting information: ; : PTFE (polytetrafluoroethylene) ; : Left-hand Twist ; Radial Shaft Seal Design: 841 LD ; : Integrated housing ; |
PAYEN : NA5131 | Shaft Seal, crankshaft | Inner Diameter: 45.00 mm; Height: 8.00 mm; Outer diameter: 67.00 mm; Radial Shaft Seal Design: 827S RD W ; Observe mounting information: ; : PTFE (polytetrafluoroethylene) ; : Right-hand Twist ; |
PAYEN : NA5132 | Shaft Seal, crankshaft | Inner Diameter: 100.00 mm; Height: 13.00 mm; Outer diameter: 125.00 mm; : Left-hand Twist ; Radial Shaft Seal Design: 829S LD W ; : FPM (fluoride rubber) ; |
PAYEN : NA5133 | Shaft Seal, crankshaft | Inner Diameter: 85.00 mm; Height: 11.00 mm; Outer diameter: 105.00 mm; Radial Shaft Seal Design: 829S LD W ; : FPM (fluoride rubber) ; : Left-hand Twist ; |
PAYEN : NA5137 | Shaft Seal, crankshaft | Inner Diameter: 33.00 mm; Height: 5.00 mm; Outer diameter: 47.00 mm; Radial Shaft Seal Design: 827S RD W ; : FPM (fluoride rubber) ; : Right-hand Twist ; |
PAYEN : NA5139 | Shaft Seal, crankshaft | Inner Diameter: 32.00 mm; Height: 6.00 mm; Outer diameter: 45.00 mm; : FPM (fluoride rubber) ; : Right-hand Twist ; Radial Shaft Seal Design: 829S RD ; |
PAYEN : NA5140 | Shaft Seal, crankshaft | Inner Diameter: 91.00 mm; Height: 10.00 mm; Outer diameter: 111.00 mm; : FPM (fluoride rubber) ; : Left-hand Twist ; Radial Shaft Seal Design: 823S LD ; |
PAYEN : NA5147 | Shaft Seal, crankshaft | Inner Diameter: 40.00 mm; Height: 7.40 mm; Outer diameter: 62.00 mm; Observe mounting information: ; : PTFE (polytetrafluoroethylene) ; : Right-hand Twist ; Radial Shaft Seal Design: 827S RD W ; |
PAYEN : NA5156 | Shaft Seal, crankshaft | Inner Diameter: 66.00 mm; Height: 12.00 mm; Outer diameter: 90.00 mm; Observe mounting information: ; : PTFE (polytetrafluoroethylene) ; : Right-hand Twist ; Radial Shaft Seal Design: 829S RD W ; |
PAYEN : NA5168 | Shaft Seal, crankshaft | Inner Diameter: 93.00 mm; Height: 11.50 mm; Outer diameter: 114.00 mm; Radial Shaft Seal Design: 827S LD W ; Observe mounting information: ; : PTFE (polytetrafluoroethylene) ; : Left-hand Twist ; |
PAYEN : NA5173 | Shaft Seal, crankshaft | Outer diameter 1: 120.0 mm; Inner Diameter: 100.00 mm; Height: 9.50 mm; Outer diameter: 120.00 mm; Radial Shaft Seal Design: 829S LD ; : FPM (fluoride rubber) ; : Left-hand Twist ; |
PAYEN : NA5175 | Shaft Seal, crankshaft | Inner Diameter: 91.00 mm; Height: 9.50 mm; Outer diameter: 108.00 mm; : Left-hand Twist ; Radial Shaft Seal Design: 829N LD ; : NBR (nitrile butadiene rubber) ; |
PAYEN : NA5181 | Shaft Seal, crankshaft | Inner Diameter: 110.00 mm; Height: 13.00 mm; Outer diameter: 130.00 mm; : Left-hand Twist ; Radial Shaft Seal Design: 829S LD W ; Observe mounting information: ; : PTFE (polytetrafluoroethylene) ; |
PAYEN : NA5191 | Shaft Seal, crankshaft | Inner Diameter: 42.00 mm; Height: 7.00 mm; Outer diameter: 62.00 mm; : Right-hand Twist ; Radial Shaft Seal Design: 829S RD W ; Observe mounting information: ; : PTFE (polytetrafluoroethylene) ; |
PAYEN : NA5192 | Shaft Seal, crankshaft | Inner Diameter: 90.00 mm; Outer diameter: 110.00 mm; Height: 7.00 mm; : Left-hand Twist ; Radial Shaft Seal Design: 829S LD W ; Observe mounting information: ; : PTFE (polytetrafluoroethylene) ; |
PAYEN : NA5196 | Shaft Seal, crankshaft | Inner Diameter: 90.00 mm; Outer diameter: 110.00 mm; Height: 9.00 mm; : Alternating Twist ; Radial Shaft Seal Design: 827S DD ; : ACM (Polyacrylate) ; |
PAYEN : NA5197 | Shaft Seal, crankshaft | Inner Diameter: 53.00 mm; Outer diameter: 70.00 mm; Height: 11.00 mm; : Right-hand Twist ; Radial Shaft Seal Design: 827S ; : MVQ (silicone rubber) ; |
PAYEN : NA5202 | Shaft Seal, crankshaft | Inner Diameter: 50.0 mm; Outer diameter: 80.0 mm; Height: 14.0 mm; : Right-hand Twist ; Radial Shaft Seal Design: SP ; : MVQ (silicone rubber) ; |
PAYEN : NA5209 | Shaft Seal, crankshaft | Inner Diameter: 99.00 mm; Height: 11.00 mm; Outer diameter: 114.00 mm; : Left-hand Twist ; Radial Shaft Seal Design: 827S LD ; : FPM (fluoride rubber) ; |
PAYEN : NA5223 | Shaft Seal, crankshaft | Inner Diameter: 40.00 mm; Height: 7.00 mm; Outer diameter: 52.00 mm; : Right-hand Twist ; Radial Shaft Seal Design: 829S RD W ; : FPM (fluoride rubber) ; |
PAYEN : NA5226 | Shaft Seal, crankshaft | Inner Diameter: 33.0 mm; Height: 8.0 mm; Outer diameter: 49.0 mm; Radial Shaft Seal Design: ASL ; : FPM (fluoride rubber) ; : Right-hand Twist ; |
PAYEN : NA5230 | Shaft Seal, crankshaft | Inner Diameter: 78.00 mm; Height: 9.00 mm; Outer diameter: 100.00 mm; Radial Shaft Seal Design: 827S RD W ; Observe mounting information: ; : PTFE (polytetrafluoroethylene) ; : Left-hand Twist ; |
PAYEN : NA5242 | Shaft Seal, crankshaft | Inner Diameter: 40.00 mm; Height: 7.00 mm; Outer diameter: 52.00 mm; : Left-hand Twist ; Radial Shaft Seal Design: 827S LD ; : ACM (Polyacrylate) ; |
PAYEN : NA5243 | Shaft Seal, crankshaft | Inner Diameter: 50.00 mm; Height: 11.00 mm; Outer diameter: 74.00 mm; Radial Shaft Seal Design: 827S RD ; : ACM (Polyacrylate) ; : Right-hand Twist ; |
PAYEN : NA5244 | Shaft Seal, crankshaft | Inner Diameter: 91.00 mm; Height: 12.00 mm; Outer diameter: 114.00 mm; Radial Shaft Seal Design: 827S LD ; : MVQ (silicone rubber) ; : Left-hand Twist ; |
PAYEN : NA5246 | Shaft Seal, crankshaft | Inner Diameter: 42.50 mm; Height: 6.00 mm; Outer diameter: 54.50 mm; : MVQ (silicone rubber) ; : Right-hand Twist ; Radial Shaft Seal Design: 827S ; |
PAYEN : NA5255 | Shaft Seal, crankshaft | Inner Diameter: 35.00 mm; Height: 7.00 mm; Outer diameter: 47.00 mm; Observe mounting information: ; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; : Right-hand Twist ; Radial Shaft Seal Design: 827S RD W ; |
PAYEN : NA5256 | Shaft Seal, crankshaft | Inner Diameter: 40.00 mm; Height: 6.50 mm; Outer diameter: 55.00 mm; Radial Shaft Seal Design: 827S RD W ; : FPM (fluoride rubber) ; : Right-hand Twist ; |
PAYEN : NA5259 | Shaft Seal, crankshaft | Inner Diameter: 40.00 mm; Height: 6.40 mm; Outer diameter: 55.00 mm; Observe mounting information: ; : PTFE (polytetrafluoroethylene) ; : Right-hand Twist ; Radial Shaft Seal Design: 827S RD W ; |
PAYEN : NF831 | Shaft Seal, crankshaft | Inner Diameter: 130.00 mm; Height: 13.00 mm; Outer diameter: 150.00 mm; Radial Shaft Seal Design: 829 S ; Observe mounting information: ; : PTFE (polytetrafluoroethylene) ; : Left-hand Twist ; |
PAYEN : NF832 | Shaft Seal, crankshaft | Inner Diameter: 90.00 mm; Height: 11.00 mm; Outer diameter: 110.00 mm; Radial Shaft Seal Design: Sp ; Observe mounting information: ; : PTFE (polytetrafluoroethylene) ; : Right-hand Twist ; |
PAYEN : NF833 | Shaft Seal, crankshaft | Inner Diameter: 90.00 mm; Height: 13.00 mm; Outer diameter: 115.00 mm; : Left-hand Twist ; Radial Shaft Seal Design: 829S LDW ; : FPM (fluoride rubber) ; |
PAYEN : NF834 | Shaft Seal, crankshaft | Inner Diameter: 35.00 mm; Height: 8.00 mm; Outer diameter: 50.00 mm; : Right-hand Twist ; Radial Shaft Seal Design: 827S RD W ; : FPM (fluoride rubber) ; |
联系客服