| 参考号 | 零件 | 参数 |
|---|---|---|
| ELRING : 789.680 | Shaft Seal, crankshaft | Inner Diameter: 85 mm; : PTFE (polytetrafluoroethylene) ; : Left-hand Twist ; Radial Shaft Seal Design: SP ; : with housing ; |
| ELRING : 009.840 | Shaft Seal, crankshaft | Inner Diameter: 85 mm; : Left-hand Twist ; Radial Shaft Seal Design: SP ; : with housing ; : with dust lip ; : PTFE (polytetrafluoroethylene) ; |
| ELRING : 012.507 | Shaft Seal, crankshaft | Inner Diameter: 65 mm; : Rubber with textile reinforcement ; Radial Shaft Seal Design: GRP ; Quantity required: 2 ; |
| ELRING : 015.834 | Shaft Seal, crankshaft | Inner Diameter: 75.84 mm; Radial Shaft Seal Design: GRP ; Quantity required: 2 ; : Rubber with textile reinforcement ; |
| ELRING : 717.450 | Shaft Seal, crankshaft | Inner Diameter: 35 mm; : PTFE (polytetrafluoroethylene) ; : Right-hand Twist ; Radial Shaft Seal Design: SP ; : with housing ; |
| ELRING : 717.820 | Shaft Seal, crankshaft | Inner Diameter: 115 mm; Fitting Position: Timing End ; Outer diameter: 140 mm; Width: 13 mm; : with dust lip ; : FPM (fluoride rubber) ; : Right-hand Twist ; Radial Shaft Seal Design: A/BS ; |
| ELRING : 272.091 | Shaft Seal, crankshaft | Inner Diameter: 90 mm; : PTFE (polytetrafluoroethylene) ; : Left-hand Twist ; Radial Shaft Seal Design: SP ; : with housing ; |
| ELRING : 497.750 | Shaft Seal, crankshaft | Inner Diameter: 84 mm; Outer diameter 1: 180 mm; Height: 16.5 mm; Outer diameter 2: 139.7 mm; : FPM (fluoride rubber) ; : Left-hand Twist ; Radial Shaft Seal Design: IWD ; : with housing ; |
| ELRING : 503.000 | Shaft Seal, crankshaft | Inner Diameter: 90 mm; : PTFE (polytetrafluoroethylene) ; : Left-hand Twist ; Radial Shaft Seal Design: IWD ; : with housing ; |
| ELRING : 728.550 | Shaft Seal, crankshaft | Inner Diameter: 45 mm; Outer diameter: 60 mm; : PTFE (polytetrafluoroethylene) ; : Right-hand Twist ; Radial Shaft Seal Design: SP ; : with housing ; |
| ELRING : 736.400 | Shaft Seal, crankshaft | Inner Diameter: 85 mm; : Left-hand Twist ; Radial Shaft Seal Design: SP ; : with housing ; : with mounting sleeve ; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; |
| ELRING : 101.577 | Shaft Seal, crankshaft | Inner Diameter: 91 mm; Thickness: 8 mm; Quantity required: 2 ; : Rubber with textile reinforcement ; Radial Shaft Seal Design: GRP ; |
| ELRING : 750.330 | Shaft Seal, crankshaft | Inner Diameter: 85 mm; Height: 15 mm; : Left-hand Twist ; Radial Shaft Seal Design: SP ; : with housing ; : with mounting sleeve ; Additionally required parts: 422.822 ; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; |
| ELRING : 123.331 | Shaft Seal, crankshaft | Inner Diameter: 69 mm; Outer diameter: 79 mm; Thickness: 5 mm; : Rubber with textile reinforcement ; Radial Shaft Seal Design: GRP ; |
| ELRING : 362.691 | Shaft Seal, crankshaft | Inner Diameter: 93 mm; : Left-hand Twist ; Radial Shaft Seal Design: IWD OF ; : with housing ; : with dust lip ; : FPM (fluoride rubber) ; |
| ELRING : 366.360 | Shaft Seal, crankshaft | Inner Diameter: 100 mm; Radial Shaft Seal Design: IWD ; : with housing ; : FPM (fluoride rubber) ; : Left-hand Twist ; |
| ELRING : 372.460 | Shaft Seal, crankshaft | Inner Diameter: 85 mm; : FPM (fluoride rubber) ; Radial Shaft Seal Design: IWD ; : with housing ; |
| ELRING : 837.549 | Shaft Seal, crankshaft | Inner Diameter: 90 mm; Outer diameter: 107 mm; Thickness: 8 mm; Quantity required: 2 ; : Rubber with textile reinforcement ; Radial Shaft Seal Design: GRP ; |
| ELRING : 397.940 | Shaft Seal, crankshaft | Inner Diameter: 100 mm; Outer diameter: 120 mm; Height: 10 mm; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; : Left-hand Twist ; Radial Shaft Seal Design: ASW ; : with dust lip ; |
| ELRING : 188.680 | Shaft Seal, crankshaft | Inner Diameter: 78 mm; Outer diameter: 94 mm; Thickness: 8 mm; Quantity required: 2 ; : Rubber with textile reinforcement ; Radial Shaft Seal Design: GRP ; |
| ELRING : 428.510 | Shaft Seal, crankshaft | Inner Diameter: 90 mm; : FPM (fluoride rubber) ; : Left-hand Twist ; Radial Shaft Seal Design: SP ; : with dust lip ; |
| ELRING : 199.180 | Shaft Seal, crankshaft | Inner Diameter: 64 mm; Height: 20 mm; : Left-hand Twist ; Radial Shaft Seal Design: IWD ; : with housing ; : FPM (fluoride rubber) ; |
| ELRING : 199.220 | Shaft Seal, crankshaft | Inner Diameter: 70 mm; Height: 14 mm; : Right-hand Twist ; Radial Shaft Seal Design: IWD ; : with housing ; : FPM (fluoride rubber) ; |
| ELRING : 199.230 | Shaft Seal, crankshaft | Inner Diameter: 114 mm; Height: 13 mm; : Left-hand Twist ; Radial Shaft Seal Design: IWD ; : with housing ; : FPM (fluoride rubber) ; |
| ELRING : 655.650 | Shaft Seal, crankshaft | Inner Diameter: 92 mm; Radial Shaft Seal Design: SP ; : with housing ; : PTFE (polytetrafluoroethylene) ; : Left-hand Twist ; |
| ELRING : 449.360 | Shaft Seal, crankshaft | Inner Diameter: 96 mm; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Radial Shaft Seal Design: SP ; : with housing ; |
| ELRING : 685.340 | Shaft Seal, crankshaft | Inner Diameter: 93 mm; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; : Left-hand Twist ; Radial Shaft Seal Design: SP ; Housing material: Sheet Steel ; |
| ELRING : 686.870 | Shaft Seal, crankshaft | Inner Diameter: 93 mm; : Left-hand Twist ; Radial Shaft Seal Design: SP ; Housing material: Cast Aluminium ; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; |
| ELRING : 232.480 | Shaft Seal, crankshaft | Inner Diameter: 84.5 mm; Radial Shaft Seal Design: SP ; : with housing ; : with dust cover ; : FPM (fluoride rubber) ; : Left-hand Twist ; |
| ELRING : 234.570 | Shaft Seal, crankshaft | Inner Diameter: 85 mm; : with housing ; : PTFE (polytetrafluoroethylene) ; : Left-hand Twist ; Radial Shaft Seal Design: IWD ; |
| ELRING : 375.320 | Shaft Seal, crankshaft | Outer diameter 1: 141 mm; Inner Diameter: 74 mm; Thickness: 17 mm; Outer diameter 2: 187.5 mm; : with housing ; : with mounting sleeve ; : FPM (fluoride rubber) ; : Left-hand Twist ; Radial Shaft Seal Design: SP ; |
| ELRING : 381.260 | Shaft Seal, crankshaft | Inner Diameter: 112 mm; Outer diameter: 147 mm; Height: 13 mm; : Left-hand Twist ; Radial Shaft Seal Design: A/BS SP ; : with dust lip ; : FPM (fluoride rubber) ; |
| ELRING : 012.370 | Shaft Seal, crankshaft | Inner Diameter: 85 mm; : Left-hand Twist ; Radial Shaft Seal Design: IWD ; : with housing ; : with mounting sleeve ; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; |
| ELRING : 012.380 | Shaft Seal, crankshaft | Inner Diameter: 85 mm; : Left-hand Twist ; Radial Shaft Seal Design: IWD ; : with housing ; : with mounting sleeve ; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; |
| ELRING : 023.861 | Shaft Seal, crankshaft | Inner Diameter: 80 mm; Radial Shaft Seal Design: SP ; : with housing ; : with dust lip ; : with mounting sleeve ; : FPM (fluoride rubber) ; : Left-hand Twist ; |
| ELRING : 023.940 | Shaft Seal, crankshaft | Inner Diameter: 88 mm; Outer diameter: 180 mm; Height: 15 mm; : Left-hand Twist ; Radial Shaft Seal Design: IWD ; : with dust lip ; : with mounting sleeve ; : PTFE (polytetrafluoroethylene) ; |
| ELRING : 023.950 | Shaft Seal, crankshaft | Inner Diameter: 79.33 mm; Height: 19 mm; Outer diameter: 131.3 mm; : with mounting sleeve ; : PTFE (polytetrafluoroethylene) ; : Left-hand Twist ; Radial Shaft Seal Design: IWD ; : with dust lip ; |
| ELRING : 026.782 | Shaft Seal, crankshaft | Inner Diameter: 50 mm; Height: 14 mm; Outer diameter: 90 mm; Radial Shaft Seal Design: ASW ; : with dust lip ; : PTFE (polytetrafluoroethylene) ; : Right-hand Twist ; |
| ELRING : 026.812 | Shaft Seal, crankshaft | Outer diameter 1: 196 mm; Inner Diameter: 106 mm; Outer diameter: 215 mm; : with housing ; : with mounting sleeve ; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; : Left-hand Twist ; Radial Shaft Seal Design: IWD ; |
| ELRING : 026.821 | Shaft Seal, crankshaft | Outer diameter 1: 184 mm; Inner Diameter: 79.8 mm; Height: 18.8 mm; Outer diameter 2: 162 mm; : Left-hand Twist ; Radial Shaft Seal Design: IWD ; : with housing ; : PTFE (polytetrafluoroethylene) ; |
| ELRING : 073.910 | Shaft Seal, crankshaft | Inner Diameter: 90 mm; : Left-hand Twist ; Radial Shaft Seal Design: IWD ; : with housing ; : with mounting sleeve ; : PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ; |
| ELRING : 123.021 | Shaft Seal, crankshaft | Inner Diameter: 79.33 mm; Height: 25.2 mm; : Left-hand Twist ; Radial Shaft Seal Design: IWD ; : with dust lip ; : PTFE (polytetrafluoroethylene) ; |
| ELRING : 199.191 | Shaft Seal, crankshaft | Inner Diameter: 93 mm; Outer diameter 1: 172 mm; Height: 12 mm; Outer diameter 2: 139.7 mm; : Left-hand Twist ; Radial Shaft Seal Design: SP ; : with housing ; : with mounting sleeve ; : FPM (fluoride rubber) ; |
| ELRING : 274.440 | Shaft Seal, crankshaft | Inner Diameter: 98.43 mm; : PTFE (polytetrafluoroethylene) ; Radial Shaft Seal Design: IWD ; : with housing ; : with mounting sleeve ; |
| ELRING : 279.810 | Shaft Seal, crankshaft | Inner Diameter: 55 mm; : Right-hand Twist ; Radial Shaft Seal Design: SP ; : with housing ; : with dust lip ; : PTFE (polytetrafluoroethylene)/FPM (fluoro rubber) ; |
| ELRING : 291.790 | Shaft Seal, crankshaft | Inner Diameter: 78 mm; Outer diameter: 100 mm; Height: 13 mm; : MVQ (silicone rubber) ; : Right-hand Twist ; Radial Shaft Seal Design: ASW ; : with dust lip ; |
| ELRING : 291.800 | Shaft Seal, crankshaft | Inner Diameter: 110 mm; Outer diameter: 130 mm; Height: 13 mm; : MVQ (silicone rubber) ; : Left-hand Twist ; Radial Shaft Seal Design: ASW ; : with dust lip ; |
| ELRING : 340.280 | Shaft Seal, crankshaft | Inner Diameter: 85 mm; : PTFE (polytetrafluoroethylene) ; : Left-hand Twist ; Radial Shaft Seal Design: IWD ; : with housing ; : with mounting sleeve ; Observe mounting information: ; |
| ELRING : 353.840 | Shaft Seal, crankshaft | Inner Diameter: 80 mm; Outer diameter: 98 mm; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; : Left-hand Twist ; Radial Shaft Seal Design: SP ; |
| ELRING : 359.180 | Shaft Seal, crankshaft | Inner Diameter: 100 mm; : Left-hand Twist ; Radial Shaft Seal Design: SP ; : PTFE (polytetrafluoroethylene) ; |
| ELRING : 364.700 | Shaft Seal, crankshaft | Inner Diameter: 85 mm; Radial Shaft Seal Design: IWD ; : with housing ; Article number of the recommended special tool: VW T10134 ; Observe mounting information: ; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; : Left-hand Twist ; |
| ELRING : 373.530 | Shaft Seal, crankshaft | Inner Diameter: 93 mm; Outer diameter: 114 mm; Height: 12 mm; Outer diameter 2: 144 mm; Height 2: 14.5 mm; Observe mounting information: ; : Left-hand Twist ; Radial Shaft Seal Design: ASW ; : with dust lip ; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; |
| ELRING : 376.730 | Shaft Seal, crankshaft | Inner Diameter: 85 mm; Article number of the recommended special tool: VW T10017 ; : PTFE (polytetrafluoroethylene) ; Observe mounting information: ; : Left-hand Twist ; Radial Shaft Seal Design: IWD ; : with housing ; : with mounting sleeve ; |
| ELRING : 377.470 | Shaft Seal, crankshaft | Inner Diameter: 85 mm; : with housing ; : with mounting sleeve ; Article number of the recommended special tool: VW T50010 ; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Observe mounting information: ; : Left-hand Twist ; Radial Shaft Seal Design: SP ; |
| ELRING : 381.640 | Shaft Seal, crankshaft | Inner Diameter: 85 mm; : Left-hand Twist ; Radial Shaft Seal Design: IWD ; : with housing ; Article number of the recommended special tool: VW T10134 ; Observe mounting information: ; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; |
| ELRING : 429.090 | Shaft Seal, crankshaft | Inner Diameter: 85 mm; : Left-hand Twist ; Radial Shaft Seal Design: IWD ; : with housing ; : with mounting sleeve ; Article number of the recommended special tool: VW T10134 ; : PTFE (polytetrafluoroethylene) ; Observe mounting information: ; |
| ELRING : 430.190 | Shaft Seal, crankshaft | Inner Diameter: 85 mm; : PTFE (polytetrafluoroethylene) ; Observe mounting information: ; : Left-hand Twist ; Radial Shaft Seal Design: IWD ; : with housing ; : with mounting sleeve ; Article number of the recommended special tool: VW T10134 ; |
| ELRING : 458.820 | Shaft Seal, crankshaft | Inner Diameter: 85 mm; : with mounting sleeve ; Article number of the recommended special tool: VW T10017 ; : PTFE (polytetrafluoroethylene) ; : Left-hand Twist ; Radial Shaft Seal Design: IWD ; : Housing with Plastic Lid ; |
| ELRING : 458.821 | Shaft Seal, crankshaft | Inner Diameter: 85 mm; : Housing with Plastic Lid ; : with mounting sleeve ; Article number of the recommended special tool: VW T10017 ; : PTFE (polytetrafluoroethylene) ; Observe mounting information: ; : Left-hand Twist ; Radial Shaft Seal Design: IWD ; |
| ELRING : 477.680 | Shaft Seal, crankshaft | Inner Diameter: 70 mm; Outer diameter: 100 mm; Height: 16 mm; Radial Shaft Seal Design: KS ; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; |
| ELRING : 477.740 | Shaft Seal, crankshaft | Inner Diameter: 130 mm; Height: 16 mm; Outer diameter: 155 mm; Radial Shaft Seal Design: KS ; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; |
| ELRING : 541.030 | Shaft Seal, crankshaft | Inner Diameter: 45 mm; Height: 9 mm; Outer diameter: 60 mm; : ACM (Polyacrylate) ; Radial Shaft Seal Design: A ; |
| ELRING : 541.040 | Shaft Seal, crankshaft | Inner Diameter: 75.9 mm; Outer diameter: 95 mm; Height: 11.3 mm; : ACM (Polyacrylate) ; Radial Shaft Seal Design: A ; |
| ELRING : 545.120 | Shaft Seal, crankshaft | Inner Diameter: 86 mm; Outer diameter: 104 mm; Height: 11 mm; : Left-hand Twist ; Radial Shaft Seal Design: A ; : FPM (fluoride rubber) ; |
| ELRING : 545.190 | Shaft Seal, crankshaft | Inner Diameter: 31 mm; Outer diameter: 50 mm; Height: 8 mm; : Right-hand Twist ; Radial Shaft Seal Design: A ; : FPM (fluoride rubber) ; |
| ELRING : 545.900 | Shaft Seal, crankshaft | Inner Diameter: 85 mm; Radial Shaft Seal Design: IWD ; : with housing ; : with mounting sleeve ; : PTFE (polytetrafluoroethylene) ; : Left-hand Twist ; |
| ELRING : 584.810 | Shaft Seal, crankshaft | Inner Diameter: 93 mm; Radial Shaft Seal Design: IWD OF ; : with dust lip ; : FPM (fluoride rubber) ; : Left-hand Twist ; |
| ELRING : 590.320 | Shaft Seal, crankshaft | Inner Diameter: 63.5 mm; Outer diameter: 79.5 mm; Width: 8 mm; Radial Shaft Seal Design: AS ; : with dust lip ; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; : Right-hand Twist ; |
| ELRING : 590.330 | Shaft Seal, crankshaft | Inner Diameter: 130.2 mm; Height: 14.8 mm; Outer diameter: 150 mm; : Left-hand Twist ; Radial Shaft Seal Design: A/BS ; : with dust lip ; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; |
| ELRING : 593.130 | Shaft Seal, crankshaft | Inner Diameter: 78 mm; Fitting Position: Timing End ; Outer diameter: 100 mm; Width: 13 mm; : Right-hand Twist ; Radial Shaft Seal Design: A/BS ; : with dust lip ; : FPM (fluoride rubber) ; |
| ELRING : 593.140 | Shaft Seal, crankshaft | Inner Diameter: 130.4 mm; Outer diameter: 160 mm; Height: 15 mm; : Left-hand Twist ; Radial Shaft Seal Design: A/BS ; : with dust lip ; : FPM (fluoride rubber) ; |
| ELRING : 600.910 | Shaft Seal, crankshaft | Inner Diameter: 74 mm; : Left-hand Twist ; Radial Shaft Seal Design: SP ; : with housing ; : FPM (fluoride rubber) ; |
| ELRING : 714.500 | Shaft Seal, crankshaft | Inner Diameter: 108 mm; Outer diameter: 135 mm; Height: 15 mm; : Right-hand Twist ; Radial Shaft Seal Design: AW/BS ; : with dust lip ; : FPM (fluoride rubber) ; |
| ELRING : 741.700 | Shaft Seal, crankshaft | Inner Diameter: 85 mm; : Left-hand Twist ; Radial Shaft Seal Design: SP ; : with housing ; : with mounting sleeve ; Article number of the recommended special tool: VW T50010 ; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Observe mounting information: ; |
| ELRING : 746.390 | Shaft Seal, crankshaft | Inner Diameter: 90 mm; : PTFE (polytetrafluoroethylene) ; : Left-hand Twist ; Radial Shaft Seal Design: IWD ; : with housing ; |
| ELRING : 746.400 | Shaft Seal, crankshaft | Inner Diameter: 93 mm; : Left-hand Twist ; Radial Shaft Seal Design: SP ; : with housing ; : PTFE (polytetrafluoroethylene) ; |
| ELRING : 804.850 | Shaft Seal, crankshaft | Inner Diameter: 85 mm; Radial Shaft Seal Design: SP ; : with housing ; : with mounting sleeve ; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; : Left-hand Twist ; |
| ELRING : 104.752 | Shaft Seal, crankshaft | Inner Diameter: 76.2 mm; Outer diameter: 89 mm; Height: 4 mm; Radial Shaft Seal Design: GRP ; Shape: A-shape ; : Felt ; |
| ELRING : 104.760 | Shaft Seal, crankshaft | Inner Diameter: 127 mm; Outer diameter: 140 mm; Height: 4 mm; Radial Shaft Seal Design: GRP ; Shape: A-shape ; : Felt ; |
| ELRING : 105.589 | Shaft Seal, crankshaft | Inner Diameter: 85.73 mm; Height: 9 mm; Outer diameter: 114.4 mm; : Felt ; |
| ELRING : 121.860 | Shaft Seal, crankshaft | Inner Diameter: 140 mm; Height: 13 mm; Outer diameter: 165 mm; : FPM (fluoride rubber) ; : Left-hand Twist ; Radial Shaft Seal Design: AW/BS ; : with dust lip ; |
| ELRING : 000.220 | Shaft Seal, crankshaft | Inner Diameter: 85 mm; Outer diameter: 105 mm; Width: 8.8 mm; : with dust lip ; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; : Left-hand Twist ; Radial Shaft Seal Design: ASW ; |
| ELRING : 000.270 | Shaft Seal, crankshaft | Inner Diameter: 136 mm; Height: 13 mm; Outer diameter: 159 mm; : with dust lip ; Observe mounting information: ; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; : Right-hand Twist ; Radial Shaft Seal Design: ASW ; |
| ELRING : 004.450 | Shaft Seal, crankshaft | Inner Diameter: 61 mm; Height: 8 mm; Outer diameter: 75 mm; : Right-hand Twist ; Radial Shaft Seal Design: ASW ; : with dust lip ; : with mounting sleeve ; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Observe mounting information: ; |
| ELRING : 007.010 | Shaft Seal, crankshaft | Inner Diameter: 115 mm; Outer diameter: 140 mm; Height: 13 mm; : FPM (fluoride rubber) ; : Left-hand Twist ; Radial Shaft Seal Design: AW/BS ; : with dust lip ; |
| ELRING : 007.750 | Shaft Seal, crankshaft | Inner Diameter: 80 mm; Outer diameter: 100 mm; Height: 9 mm; : FPM (fluoride rubber) ; : Left-hand Twist ; Radial Shaft Seal Design: ASW OF ; : with dust lip ; |
| ELRING : 010.360 | Shaft Seal, crankshaft | Inner Diameter: 35 mm; Height: 6 mm; Outer diameter: 49 mm; : ACM (Polyacrylate) ; : Right-hand Twist ; Radial Shaft Seal Design: AS ; : with dust lip ; |
| ELRING : 127.610 | Shaft Seal, crankshaft | Inner Diameter: 42 mm; Height: 7 mm; Outer diameter: 55 mm; : with dust lip ; : FPM (fluoride rubber)/ACM (polyacrylate rubber) ; : Right-hand Twist ; Radial Shaft Seal Design: ASW ; |
| ELRING : 128.210 | Shaft Seal, crankshaft | Inner Diameter: 80 mm; Height: 13 mm; Outer diameter: 100 mm; Radial Shaft Seal Design: A ; : without dust lip ; : MVQ (silicone rubber) ; : Left-hand Twist ; |
| ELRING : 015.220 | Shaft Seal, crankshaft | Inner Diameter: 78 mm; Height: 12.7 mm; Outer diameter: 100 mm; Radial Shaft Seal Design: AW/B ; : with dust lip ; : MVQ (silicone rubber) ; : Right-hand Twist ; |
| ELRING : 129.780 | Shaft Seal, crankshaft | Inner Diameter: 32 mm; Height: 10 mm; Outer diameter: 47 mm; : Right-hand Twist ; Radial Shaft Seal Design: ASW ; : with dust lip ; Observe mounting information: ; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; |
| ELRING : 022.160 | Shaft Seal, crankshaft | Inner Diameter: 30 mm; Outer diameter: 44 mm; Height: 7 mm; : Right-hand Twist ; Radial Shaft Seal Design: AS ; : with dust lip ; : ACM (Polyacrylate) ; |
| ELRING : 022.170 | Shaft Seal, crankshaft | Inner Diameter: 34 mm; Outer diameter: 48 mm; Height: 7 mm; : Right-hand Twist ; Radial Shaft Seal Design: AS ; : with dust lip ; : ACM (Polyacrylate) ; |
| ELRING : 023.520 | Shaft Seal, crankshaft | Inner Diameter: 38 mm; Outer diameter: 52 mm; Height: 6 mm; : FPM (fluoride rubber) ; : Right-hand Twist ; Radial Shaft Seal Design: ASW ; : with dust lip ; |
| ELRING : 023.530 | Shaft Seal, crankshaft | Inner Diameter: 46 mm; Outer diameter: 58 mm; Height: 7 mm; : FPM (fluoride rubber) ; : Right-hand Twist ; Radial Shaft Seal Design: AS ; : with dust lip ; |
| ELRING : 023.590 | Shaft Seal, crankshaft | Inner Diameter: 33 mm; Height: 5 mm; Outer diameter: 47 mm; : FPM (fluoride rubber) ; : Right-hand Twist ; Radial Shaft Seal Design: ASW ; : with dust lip ; |
| ELRING : 023.631 | Shaft Seal, crankshaft | Inner Diameter: 37 mm; Height: 6 mm; Outer diameter: 50 mm; : with dust lip ; : FPM (fluoride rubber) ; : Right-hand Twist ; Radial Shaft Seal Design: AS ; |
| ELRING : 023.640 | Shaft Seal, crankshaft | Inner Diameter: 47.62 mm; Height: 8.9 mm; Outer diameter: 63.5 mm; Radial Shaft Seal Design: A/BS ; : with dust lip ; : FPM (fluoride rubber) ; : Right-hand Twist ; |
| ELRING : 023.740 | Shaft Seal, crankshaft | Inner Diameter: 40 mm; Height: 7.4 mm; Outer diameter: 62 mm; Radial Shaft Seal Design: ASW ; : with dust lip ; : with mounting sleeve ; : PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) ; Observe mounting information: ; : Right-hand Twist ; |
| ELRING : 023.862 | Shaft Seal, crankshaft | Inner Diameter: 80 mm; : Left-hand Twist ; Radial Shaft Seal Design: SP ; : with housing ; : with dust lip ; : with mounting sleeve ; : PTFE (polytetrafluoroethylene) ; |
共
693
条记录，分7
页显示
